Assembly of Tom's early bronco 3 piece hard top

[Bart]

I purchased one of Tom's 3 piece (weld together) Early Bronco hard tops. Has anyone done a video of this or a link to same or ????

 

[DirtDonk]

Haven’t heard one yet, I don’t remember hearing of someone finishing their project here yet either. Maybe someone’s got some photos and progress reports.
Anyway, best of luck!
Hopefully someone has some insight. There are lots of Bronco specific YouTube videos, but I haven’t run across one on the hardtop yet.
Lucky you! You might be the first!

 

[Bart]

I spoke with Tom's this morning and pretty much got the same answer. My plan is to put the stakes in/on either the side pieces to hold them in place and lower the top down and see what happens. Thanks for the Good luck wish. I may need it.

 

[ssray]

I purchased one of Tom's 3 piece (weld together) Early Bronco hard tops. Has anyone done a video of this or a link to same or ????

Copy the line below into google. Might be some posts with helpful tips. I put a clickable link as well but they don’t seem to work with my iPad.

site:classicbroncos.com welding hard top

Link to try???

 

[Bart]

Copy the line below into google. Might be some posts with helpful tips. I put a clickable link as well but they don’t seem to work with my iPad.

site:classicbroncos.com welding hard top

Link to try???

The "link to try" doesn't work for me either. I'll try a search here. Thanks

 

[ssray]

The "link to try" doesn't work for me either. I'll try a search here. Thanks

You’re welcome! Google must block direct links. If you strike out here you can try using the ”site” search. It seems to work better than most forum search engines. And different search phrases can help as well. Good luck!

 

[Oldtimer]

Try this link:

https://www.google.com/search?q=site:classicbroncos.com+welding+hard+top&sourceid=chrome&ie=UTF-8