Ax 15 clutch bracket problem

[Woodm]

Hello everyone I try not to come on here and ask a really stupid question but I’m stuck I am installing an AX 15 that I bought from Wildhorse is with the advanced adapter kit.Im trying to install the bracket that goes into the side of the bell housing and then connects to that little bracket that you have to drill out the threads on the block to the front. The spacing is not long enough without grinding on the actual block to try to move it back I hope somebody else has already solved this problem and they can point out something that I’m not seeing I will try to forward a picture

 

[Woodm]

No success with uploading photos technology whooped my butt again

 

[chuckji]

How to upload photos:
https://classicbroncos.com/forums/showthread.php?t=34373

 

[DirtDonk]

Is this the piece you're talking about? https://www.wildhorses4x4.com/product/EFI_Clutch_Equalizer_Conversion_Bracket/Early_Bronco_Clutch
Or something else?

Paul

 

[Woodm]

Here was my problem either there was never a bracket supplied or maybe they just never ship me one but I didn’t wanna wait so this was the fix

 

[jmhend]

Looks great. Nice fab skills it looks factory.

 

[Stu7054]

Just grind down the block. Plenty of material there. Simple solution.