• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Billit fuel door

mnido

Sr. Member
Joined
Jul 20, 2007
Messages
993
I would like to do a billit fuel door with the filler cap inset. Has anyone done this with the fenders cut ? If so what is the brand name, my concern is clearance, I realize I will have to trim the flares. Thanks
 

Tito

CB Fire Starter
Joined
Jan 29, 2006
Messages
10,781
Loc.
Bakersfield, CA
I did, I used a motorcycle gas tank. It was a pain (still is) to get the filler to work right. The aero cap is the way to go. The modern vehicle billet doors are too big (look and fit) for the Bronco cut quarters. Search aero fuel door and you should find info. The motorcycle method I think is a little cleaner look than the aero but not nearly as easy.
 

Attachments

  • pinky4.jpg
    pinky4.jpg
    165.5 KB · Views: 257
  • gascap.jpg
    gascap.jpg
    246.9 KB · Views: 371
OP
OP
mnido

mnido

Sr. Member
Joined
Jul 20, 2007
Messages
993
I don't mind the difficult install, my concern is what kind of issue are you having with the filler ? Is it because you had to trim the filler tube (shorten ) ? Where diid you purchase yours ?
 

Tito

CB Fire Starter
Joined
Jan 29, 2006
Messages
10,781
Loc.
Bakersfield, CA
yup! I cut the neck down and welded it to the gas door that I inistalled but it was hard to get the angle right and since it is soooooo tight in that filler section I am having trouble sealing the rubber tube to the filler neck that is left. My filler is at a bad angle and the rubber filler just doesnt want to fit right. I need to cut the vent off and run it separately to fix it. I know what I need to do to fix it but I just havent done it yet. It really was an easy mod I just was inexperienced. I would definitely do it again...and use another motorcycle tank too.
 
OP
OP
mnido

mnido

Sr. Member
Joined
Jul 20, 2007
Messages
993
I like the look of yours ! Did you have to get a salvaged tank and cut the part out ?
 
OP
OP
mnido

mnido

Sr. Member
Joined
Jul 20, 2007
Messages
993
Hot Wheels do you have any issues when filling up with gas other than the price ?
 

HotWheels

Bronco Guru
Joined
Jul 8, 2003
Messages
9,179
Loc.
Twilight Zone
Hot Wheels do you have any issues when filling up with gas other than the price ?

Nope. I love the mod. I am adding a vent to the vapor reurn tube. I am also adding a water/fuel separator on the cross-frame infront of the gas tank.

But im in the process of installing a/c right now.
 

Frankenhorse

Sr. Member
Joined
Nov 18, 2004
Messages
448
Loc.
Smyrna,TN
yup! I cut the neck down and welded it to the gas door that I inistalled but it was hard to get the angle right and since it is soooooo tight in that filler section I am having trouble sealing the rubber tube to the filler neck that is left. My filler is at a bad angle and the rubber filler just doesnt want to fit right. I need to cut the vent off and run it separately to fix it. I know what I need to do to fix it but I just havent done it yet. It really was an easy mod I just was inexperienced. I would definitely do it again...and use another motorcycle tank too.



I didn't think you Oregonians were aloud to pump your own gas.?:?
 

Frankenhorse

Sr. Member
Joined
Nov 18, 2004
Messages
448
Loc.
Smyrna,TN
I always got the stink eye from them every time I went to Wa. I would cross the Ca border and just hop out and start filling. I always seem to forget.


I like the Aero fuel doors. I may have to tackle that at some point.
 

76MaBronco

Contributor
Bronco Guru
Joined
May 21, 2007
Messages
4,221
Loc.
Massachusetts
I always got the stink eye from them every time I went to Wa. I would cross the Ca border and just hop out and start filling. I always seem to forget.


I like the Aero fuel doors. I may have to tackle that at some point.

You can't pump your own gas in CA???? What's up with that?
 

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,552
good one bax got pics?

These fit and are just the right size. No need to make the stock hole bigger and they are not too big around so they pull up pretty good to the body.

I got a front bumper put on too.

Bax
 

Attachments

  • P1010015.JPG
    P1010015.JPG
    69.1 KB · Views: 149
  • P1010016.JPG
    P1010016.JPG
    68.1 KB · Views: 132
  • P1010017.JPG
    P1010017.JPG
    65 KB · Views: 132
  • P1010018.JPG
    P1010018.JPG
    70 KB · Views: 135
Top