• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Black Cloud Boob Job Build Thread

Monster Mike

Sponsor/Vendor
Bronco Guru
Joined
Dec 29, 2010
Messages
1,774
Placement of the front axle is very interesting. Are you still planning on using the bronco tub & fenders for this build? If so it will probably look somewhat like a bronco and a buggy had kids lol

any foose drawings of the finished build for us to drool over?

Is the rear axle going to be pushed all the way back also?

This is a sick build, that water jet makes my plasma cutter seem out dated!
 

AaronB

New Member
Joined
Jan 26, 2012
Messages
46
Loc.
Longmont, CO
Placement of the front axle is very interesting. Are you still planning on using the bronco tub & fenders for this build? If so it will probably look somewhat like a bronco and a buggy had kids lol

any foose drawings of the finished build for us to drool over?

Is the rear axle going to be pushed all the way back also?

This is a sick build, that water jet makes my plasma cutter seem out dated!

No finished "Foose" drawings, just going to have to wait, sorry.

The front axle was pushed out in front of the motor for tire clearance at full lock. The 50 degrees of steering angle is insane to say the least. Also will help in balancing the weight front and back. We are trying everything in our powers to make this look "stock", but yes, it probably will look as if a buggy and and EB mated. Front fenders will have to be tapered in and the grill looks like will have to be narrowed 12", but it should stay the same length overall as the stock body. The wheel base is extended to 109". And the rear was pushed back some as well. But nothing like the front. 'Bout 5-6".
 
Last edited:

AaronB

New Member
Joined
Jan 26, 2012
Messages
46
Loc.
Longmont, CO
Couple more parts came in this week, including an absolutely BEAUTIFUL aluminum sheet metal oil pan. Unfortunately, we won't be able to use it. Took to much space and we would have had to go back to the drawing board as far as front suspension and axle placement. The pan was truly a work of art though, and I think we were all a little disappointed that it couldn't be used in this project. It was honestly just a shot in the dark that didn't quite work out (it was on a shelf at a friend of Coby's go fast shop). Oh well, I did manage to snap a quick couple of photos of it:

2012-03-2210-48-23221-XL.jpg


2012-03-2210-48-56480-XL.jpg


2012-03-2210-49-29904-XL.jpg


We also got a little more work done on the main rails. Cut a bunch of standoff's and then bent up a couple more rails, and with a little welding, we got ourselves a ladder frame.

2012-03-1916-36-5067-XL.jpg


2012-03-1918-01-1088-XL.jpg


2012-03-2014-47-07384-XL.jpg


2012-03-2014-47-45882-XL.jpg
 

AaronB

New Member
Joined
Jan 26, 2012
Messages
46
Loc.
Longmont, CO
We also got the 2nd batch of waterjet parts cut.

2012-03-2014-56-56280-XL.jpg


Couple news designs:

2012-03-2014-58-33671-XL.jpg


2012-03-2014-59-30165-XL.jpg


2012-03-2014-59-4627-XL.jpg


And we were able to get front truss welded together.

2012-03-2218-19-16336-XL.jpg


2012-03-2218-19-46667-XL.jpg


2012-03-2218-20-59712-XL.jpg


Some of the brackets welded together:

2012-03-2318-14-56299-XL.jpg


2012-03-2318-18-26184-XL.jpg


2012-03-2318-25-49569-XL.jpg
 

AaronB

New Member
Joined
Jan 26, 2012
Messages
46
Loc.
Longmont, CO
I have said this before but thought it was worth mentioning again... 50 degrees of steering is insane!

untitled-5275-XL.jpg


Some of the throttle body that came in. Believe it is a 65mm dual bore:

untitled-4630-XL.jpg


untitled-4627-XL.jpg


untitled-4629-XL.jpg


And a couple more of the ladder frame:

untitled-4641-L.jpg


untitled-4682-L.jpg


untitled-5329-L.jpg


Lots more to update ya'll on. Will try to find some time soon.
 

Wyflyer

Bronco Guru
Joined
Apr 1, 2008
Messages
2,920
This is a great build thread, keep it up.
I've been waiting since January for the boobs.
 
OP
OP
C

coby

Full Member
Joined
Apr 24, 2003
Messages
317
Loc.
Fort Collins, CO
This is a great build thread, keep it up.
I've been waiting since January for the boobs.

Boob project isn't getting underway till the fall now.....gonna be a bit of a wait. Still searching for the right fabricator for that project. We're interviewing other projects from potential fabricators currently. In fact, if you're in the area come to the party at the Hughey House tonight...got a dj 'n strippers on their way.
 
OP
OP
C

coby

Full Member
Joined
Apr 24, 2003
Messages
317
Loc.
Fort Collins, CO
The Black Cloud will be able rotate rather than simply turn.


Hehe....with cutting brakes and ARB's, that's absolutely true.

Ok....been thinkin' about it and I think it's time for a new name. This has become an entirely new rig.

I'm thinkin' KillaHorse....since it'll be a 1000hp Bronco. Whatcha think...gay or not?
 

harder93

Jr. Member
Joined
Mar 12, 2012
Messages
104
thats amazing work wish i had some money like that. that things barely even a bronco anymore under the skin
 
OP
OP
C

coby

Full Member
Joined
Apr 24, 2003
Messages
317
Loc.
Fort Collins, CO
thats amazing work wish i had some money like that. that things barely even a bronco anymore under the skin

It ain't a bronco under the skin at all. We're up to about $110k spent so far. Still got a lot more work to get done before she rolls out.
 

broncobsession

Bronco Guru
Joined
Aug 12, 2001
Messages
4,049
It is great to see what you can accomplish on a budget ;)

Well, compared to the Icon anyway. Looking good.

I guess you really did buy a bunch of BAC. It's up a couple bux since your recc :cool:

But, GNW is down 75 cents :p
 

harder93

Jr. Member
Joined
Mar 12, 2012
Messages
104
and im thinking my 7000 is a bunch lol. but i guess that is off a jack in the box salary and only had it a month in a half.
 
OP
OP
C

coby

Full Member
Joined
Apr 24, 2003
Messages
317
Loc.
Fort Collins, CO
It is great to see what you can accomplish on a budget ;)

Well, compared to the Icon anyway. Looking good.

I guess you really did buy a bunch of BAC. It's up a couple bux since your recc :cool:

But, GNW is down 75 cents :p

Hence me sellin' some of the BAC and buyin' a bit more GNW. however....these are both year or more stocks. Don't sweat the short term.

And yea, it's really weird building on a big budget....I've always struggled to conserve every last dime before. This is a first for me and I can't say I don't like it.....
 
Top