Blueprint motors Bronco spec 306 cam specs. Does anyone have them?

[markw]

Does anyone have the cam specs for this motor?
Thanks In advance. Mark

 

[lars]

Does anyone have the cam specs for this motor?
Thanks In advance. Mark

Which year, Mark? As far as I know they used to source all their cams from Comp Cams, off the shelf grinds. But they have changed over the years. My engine(s) being an example. No idea what they are using now.

 

[.94 OR]

I happened across the spec sheet for a 390Hp/370Tq motor. I'm guessing the difference is in the cam but I haven't seen those specs.

 

[markw]

Thanks guys! The engine is about 10 years old. I’m sure the specs you found will work.

 

[Soylent]

I happened across the spec sheet for a 390Hp/370Tq motor. I'm guessing the difference is in the cam but I haven't seen those specs.

That looks like my rug under the sheet.

 

[markw]

Which year, Mark? As far as I know they used to source all their cams from Comp Cams, off the shelf grinds. But they have changed over the years. My engine(s) being an example. No idea what they are using now.

Hey Lars, I just put a new cam synchronizer with your adapter in the race Bronco. Garry built a beautiful new harness so I can use the Explorer ECU. B awhile before we get it running but is so much nicer than what we had before.

 

[.94 OR]

That looks like my rug under the sheet.

That very well could be. I don't remember where that pic came from.

 

[toddz69]

I looked up the specs for the current edition of the Blueprint Bronco engine and it matched the specs of this Comp Cam:

https://www.compcams.com/magnum-computer-controlled-215-220-hydraulic-roller-cam-for-ford-5-0l.html

Engine is currently rated at 365 hp:

https://blueprintengines.com/collections/ford-compatible/products/bp302maxct

Todd Z.

 

[73azbronco]

call blueprint??

 

[Soylent]

Just to clarify the spec sheet for my motor above is not for Blueprints “Bronco” motor. They were out of stock for several months so I went with that one. Was about 8+ years ago. The hp/tq curves were a little more “upstairs” from the Bronco edition iirc.

 

[chuckji]

I’ve had my Blueprint 306 Bronco Edition for 7 years. Couldn’t find the spec sheet, but found this in an old email communication I had with a Holley Sniper tuner.

 

[badandy73]

call blueprint??

Second this, if you give them the serial number of the motor they'll be able to provide any info you need.