• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Bronco half cab question?

Stevea

Jr. Member
Joined
Mar 16, 2011
Messages
100
I have a 68 half cab Bronco, but the Vin and the title match a wagon. Did all Broncos come with the mounting holes for the half cab? I feel like someone may have changed the glove box and the title out on another Bronco. I have striped the whole thing and there was no medium blue on it anywhere and that's the color the vin said it was.

I'm not too worried if it's not correct, but just trying to do a little investigation on it. As long as the vin plate and title match, I'm good.
 

rguest3

Bronco Guru
Joined
Dec 13, 2012
Messages
3,780
What does the VIN on the frame say? Here in FL the title has to match the VIN on the frame.

Color code is on the Glove Box Data Plate not within the VIN number itself. Did you mean data plate for color code?

Broncohio.com will help with some VIN info too.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,110
What's the VIN (at least the first part of it)?
Does it have a row of holes on the top of each bed rail?

In short any top can be installed Bronco. A half cab top will bolt right onto a wagon or a roadster (maybe a hole needs to be drilled here or there). Wagon tops and roadster door inserts the same.

Someone like the half cab better then a wagon, so they changed there wagon into a half cab. Just bolt on parts.

The bulkhead was an option on all cabs in the early years (standard on the half cab).
 
OP
OP
S

Stevea

Jr. Member
Joined
Mar 16, 2011
Messages
100
The first part of the vin is U15NLC

I'm pretty sure it's a wagon vin number. The bulk head has all the correct holes with original nuts welded to the underside and on both sides behind the door opening.

It does have holes on the sides of the bed, but I can't tell you if they were original or not.

I will have to do some cleaning on the frame to check the numbers for matching frame and body. Tomorrow I will try to get it.

I'm just doing this because I'm curious. Not trying to find fault or make it something it's not.
 
OP
OP
S

Stevea

Jr. Member
Joined
Mar 16, 2011
Messages
100
You are probably correct. I was just wondering about the bulk head holes. I will still check the vin on the frame for kicks and giggles.
 

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,121
Loc.
Cuchara, CO
Many wagons came with a bulk head - known as a delivery model. Also the early ones (at least though 68?) came with the holes and weld nuts for the bulkhead and just had machine screws in them to plug the holes. So a bulk head was easy to install in any early EB.
 

BOBS 2 68S

Full Member
Joined
Jul 26, 2015
Messages
280
Loc.
Hudson, CO
My 68 was a full top when I bought it. I bought a 1/2 cab top and bulkhead to convert it to a 1/2 cab Bronco. All the mounting holes were there.
 
Top