• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Bronco….. lowering?

Daveyd

Jr. Member
Joined
Apr 1, 2014
Messages
71
Loc.
Orange County
I have a 68 bronco with a 2.5 lift. It’s great looks great drives pretty sweet but needs some sway bars and a steering box rebuild. It’s not quite what I was looking for. Going into it I didn’t want a big lift, I wanted ultra capability. I wanted to be going at a good clip down a highway and be able to turn off onto gravel or a desert road with stability and comfort. I could take a couple leaves out and cut the coil I guess, but don’t want to cut it yet. Granted stock height broncos aren’t grand tourers I like the planted feeling. I guess I’m lucky, I have 33x10.5r17 on methods and never rubbed anything but the radius arms. It looks like I could still lower it a little and not rub. I’m guessing the correct way to keep travel but keep cog low is to raise shock and spring mounting points on the frame.
 

Attachments

  • 2E0A548D-6D69-4D14-BAC6-F8F3D933B7EC.jpeg
    2E0A548D-6D69-4D14-BAC6-F8F3D933B7EC.jpeg
    482.1 KB · Views: 130
Last edited:

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
There is a lot of ways to do that. You don't have to go as far as I did LOL. but with 1-1/2" of lift you'll still have good travel and ride. Its all a matter of what you want. Example, I wheel with buggies and cruise with buddies riding their baggers and hang happily with both. Low CG is where it is at. Sounds extreme, but it is amazing how much more planted you feel if you lower the seats, it really helps with the weble wable feeling, sitting your seat closer to the vehicle CG changes that aspect so much.
 
OP
OP
D

Daveyd

Jr. Member
Joined
Apr 1, 2014
Messages
71
Loc.
Orange County
There is a lot of ways to do that. You don't have to go as far as I did LOL. but with 1-1/2" of lift you'll still have good travel and ride. Its all a matter of what you want. Example, I wheel with buggies and cruise with buddies riding their baggers and hang happily with both. Low CG is where it is at. Sounds extreme, but it is amazing how much more planted you feel if you lower the seats, it really helps with the weble wable feeling, sitting your seat closer to the vehicle CG changes that aspect so much.
Yeahhhh I almost bought the wild horses 1.5 and wish I would have. But it is what it is. I’d love to lower the seats. Being 6’3” of pure torso, that’s attractive. My body bushings are new or I’d ditch them. Maybe cut them in half? I’m up for any ideas
 

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
I cut the floor on mine and lowered the seats to the point that the seated height is the same height as the original floor. There are several others that have done something similar since I did mine. Like you I like sitting low and feeling planted. I took it to an extreme and built a custom chassis, running 37’s with no lift. I do have a bad habit of driving and wheeling it hard. Low CG not only makes it feel better it performs better.
 

.94 OR

Contributor
Bronco Guru
Joined
Jul 5, 2009
Messages
2,215
Loc.
Willamette Valley, OR
A bit off topic, but somewhat similar.

One timber cruising job I was on, we were camped next to some loggers that ran the woods roads almost every day. Got to playing horseshoes with one guy that had a stock looking F150 SWB but ran tall tires. Got to asking about it and he said he orders an F150 with the 300/6 manual box with super low gears. Receives the pickup, installed a 3" body lift and 36" tires (which were a relatively large tire in the early 90's). Now, he had the ride of a stock pickup, the clearance and floatation of big tire rig and the mileage due to the proper gearing and 6 cylinder engine and still had plenty of power to turn the tires. When he is done with the truck, he can pull the big tires and the body lift and it looks factory stock again. That concept still sticks with me.
 
Top