Bronco Parts in Nor-Cal

[lil-bronc]

Hey guys I just wanted to send out a little note that I will be parting out my bronco at the end of the summer. Below are the parts I will be selling:

1. NV4500 with all the brackets - SOLD
2. Dana 20 with twin stick - $200
3. Sagniaw Box and Pump & Hydro-Assist - $650
5. Knuckle over steering with GM tie rods - SOLD
6. Adjustable track bar - SOLD
7. Tilt steering column with Borgenson Shaft - SOLD
9. Glass Windshield - SOLD
10. Complete Softtop - SOLD
11. Long Headers - SOLD
12. Full Soft Doors - SOLD
13. Roadster Doors - $325
14. Shackle Flip Kit w/leaf springs and new shackle & bushings - $50
15. 4.5" BC Coil springs - SOLD
16. 16" Bilstein shocks - SOLD
17. Speedometer Cable - SOLD
18. Steeing linkage - SOLD
19. Drop pitman arm - SOLD
20. Standard pitman arm - $25
21. Windshield Motor & Arms - SOLD
22. 3" body lift - SOLD
23. Frame, Body (Dove Tailed front & rear) - SOLD
24. HP D44 housing EB width w/ raised track bar bracket - SOLD
25. Track bar drop bracket - SOLD
26. Electronic fuel selector - $15
27. Weather stripping (doors) - $35


That is the list so far, more might come.

 

[benkokes]

This is a trick, right? I mean, seriously. Who in their right mind would be parting out their bronco with all that ultimately awesome stuff on it? I mean, is there a camera on me or something??? ;-)

Seriously though, I am curious about the steering column

 

[Daddy4zack]

Lance I may be interested in the following:

2. Dana 20 with twin stick
3. Sagniaw Box and Pump
5. Knuckle over steering with GM tie rods
6. Adjustable track bar
10. Complete Softtop
12. Full Soft Doors
13 Roadster Doors


Aaron

 

[green73brc]

I would be interested in the following... Oddly enough in priority...

7. Tilt steering column with Borgenson Shaft
8. Custom Roll Cage
10. Complete Softtop
11. Long Headers
14. Shackle Flip Kit

 

[jlyman27]

I am interested in the nv 4500

 

[BG's 68 Bronco]

Bilstein shocks. How many and how much?

 

[cracker]

With what has been spoken for, I guess it leaves me with the hydro assist kit. What is it for and how much for it, shipped to 81006.

Dave

 

[lil-bronc]

This is no joke. I am using the axles, and engine to build a buggy. I have a 72 bronco that has been narrowed in the front and rear about 20" but the body has some dents and I think it would be to much work to replace the panels and sell the thing outright. Especially since I do have a lot of money in the axles and am very happy with the HO 302 on propane.

I am planning on doing this part out in September/October.

I have already answered a couple of PMs and I will start those PMS and from here on out at the top of this post.

Thanks

 

[bob_lafrentz]

Hi lil-bronc,

I'd be interested in the hydro-assist kit, kuckle over steering, roll cage, and the soft top. If you could email me some pics, condition and brand of the items, I'd greatly appreciate it. Oh yeah, and prices. Thanks.

bob_lafrentz@yahoo.com

 

[buknbrco]

I'll be second to take interest on nv4500 w/ brackets

 

[green73brc]

I would be interested in the following... Oddly enough in priority...

7. Tilt steering column with Borgenson Shaft
8. Custom Roll Cage
10. Complete Softtop
11. Long Headers
14. Shackle Flip Kit

Based on the origonall post I am not "calling" dibs just giving feed back that I am interested...

 

[7elk]

I would also be interested in the long headers but don't want to go before anyone who has asked already.7elk

 

[lil-bronc]

Well it is earlier then planned but here I go. Everything is now for sale and is still on the bronco but would take me only a little time to get it off when it sells.

lil-bronc

 

[boomeroid]

How much for the....

The BC springs, are they the coils or the leafs, and how much?
Thanks,
Mundo

 

[KManuel]

If the p/s is still available......?

 

[76rustomatic]

How about sheet metal? How old are the coil springs?

 

[Kansas Corey]

lil-bronco,

can you post/email me a pic of the roadster doors?

Thanks,
corey

 

[lil-bronc]

The BC springs, are they the coils or the leafs, and how much?
Thanks,
Mundo

BC coils for $100, they only have about 4 trips on them.

lil-bronc

 

[lil-bronc]

If the p/s is still available......?

Yes, truely awesome. I was able to turn my 37's against a rock with little effort. Saginaw box, bracket, saginaw pump with brackets. I also have the hydro-assist ram and lines.

lil-bronc

 

[lil-bronc]

lil-bronco,

can you post/email me a pic of the roadster doors?

Thanks,
corey

The roadster doors are identically as the ones that BC broncos was selling a few years ago. I haven't finished making them but they are close to being done. They have the half hinges on them that make them easy to remove.

lil-bronc