built Dana 44 with suspension and steering

[broncodude_73]

I'm PARTING OUT a 1974 bronco D44
its has:
4.27 yukon gears
detroit locker
yukon 4340 axle shafts with spicer 5-760x u-joints and full circle retaining clips
new 1310 pinion yoke
79 3/4ton d44 flat top knuckles
custom made 4340 1/2ton spindles
79 1/2 ton hubs and rotors
79 thunderbird brake calipers
stainless brake lines
warn premium locking hubs

It was all put together about a year and a half ago so eveything is new and has less than 1,000 miles on it.

I'm also including my 1 ton crossover steering.
If you want you can get my pittman arm too, and maybe even a rebuilt steering box.

Also the axle has been setup for a 3 link suspension design. It will be sold with all of the bracketry and suspension links.
All you need to do to make it work is buy some springs and buy some frame brackets from ballistic fabrication to attach the links to the frame.

This is a link to my suspension build.
http://classicbroncos.com/forums/showthread.php?t=102340

I'm sure i forgot something else, but if i can think of anything I'll post it up.

I'm asking $1,500 for all of it.

 

[broncodude_73]

somebody buy this

 

[broncodude_73]

I have began to part this thing out, so if there is something that you may want let me know. I will also be selling my 73 model power steering box. It has been rebuilt and works perfect. With it you will also get the power steering pump.

 

[broncodude_73]

the gears and locker have been sold, but everything else is still there and good

 

[BroncoMark]

How much for the t-bird calipers and brake lines?

 

[DonaldDouchebag]

What would you sell the hub/rotor assemblies for? (Without the lockouts.)

 

[berdeman]

How nuch for the yukons ?

 

[broncodude_73]

shafts and joints are about 90% sold right now. I know that doesn't make sense, but I have a guy coming to pick them up. If it doesn't go through, i'm asking $300 for them.

 

[bigjhoov]

I will take the shafts. I'll coming to Hammond, LA tomorrow and can pick them up. Let me know.

 

[broncosbybart]

pm sent. let me know.

 

[broncodude_73]

sent pms

 

[broncodude_73]

axle shafts have been sold