• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Bumper Install

Comemonday71

Jr. Member
Joined
Jun 19, 2019
Messages
138
Hi Guys!

Getting prepared for delivery of my ProtoFab bumper (rear). May be a lame question but is there proper way to install a bumper?
 

SteveL

Huge chevy guy
Joined
Jun 24, 2001
Messages
11,969
Loc.
Hawthorne ca
Should be self explanatory. Does it come with grade 8 hardware? Might be a trip to the local hardware store involved.
 

nickgp

Bronco Guru
Joined
Jan 17, 2010
Messages
1,024
Check the frame horns for condition. You may have to reinforce them by welding additional material onto them
 

SteveL

Huge chevy guy
Joined
Jun 24, 2001
Messages
11,969
Loc.
Hawthorne ca
Years back somebody was selling frame inserts for reinforcement. They were threaded at the stock locations and also allowed for bolts further back.
 

idus25

Contributor
Full Member
Joined
Oct 30, 2014
Messages
213
Loc.
St. Louis
Buddy system and/or jack stands. Looking at them as well. Post some pics. Curious about the space between tailgate and bumper. Good luck.
 

Steve83

Bronco Guru
Joined
Jul 16, 2003
Messages
9,360
Loc.
Memphis, TN, USA, Earth, Milky Way
Align the body before jamming the bumper into the frame. If the body is out-of-place on the mounts, the bumper will hit the sheet metal & paint. You may need to replace the body mounts before installing the bumper.

Some assertive persuasion with a BPH & a couple of short 2x2" thick-wall tubes will get the frame horns back into the correct shape.
 
OP
OP
Comemonday71

Comemonday71

Jr. Member
Joined
Jun 19, 2019
Messages
138
Thanks all for the comments! As requested I will look to post some pictures when all is said and done. Going to try to install myself. Thanks again guys!
 
Top