• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

C4 Floor shifter - looking at options

70 Steed

Full Member
Joined
Sep 13, 2011
Messages
268
Are you running a Tuffy center console? If so will you be able to reach the shift lever? I was considering a Winters shifter from WH but after some research I convinced I wouldn't be able to reach the lever. I'm probably going with a Locar shifter from Duff.
 

Fredly1

Sr. Member
Joined
Jul 13, 2004
Messages
353
Lokar shifter

44e0cbc4-6d02-0875.jpg
 

pcf_mark

Bronco Guru
Joined
Jun 11, 2010
Messages
3,697
I have the Lokar also. Very nicely made, good detents, easy to adjust NSS. Not having a back up light switch sucks. I just used a toggle but it is so ineligant.
 

Fredly1

Sr. Member
Joined
Jul 13, 2004
Messages
353
Got that from Summit Racing. It's the 6" floor mounted. Part# FMS60C4FM
I am planning to finish it off with a boot
 
OP
OP
JWMcCrary

JWMcCrary

Contributor
Bronco Guru
Joined
Oct 14, 2004
Messages
5,001
I didn't know you could get a 6" shift lever, I like that. What about the mounting, looks like you made something similar to what is used for a 3 speed manual floor shifter..????
 

Fredly1

Sr. Member
Joined
Jul 13, 2004
Messages
353
It originally had a 3speed on the floor. When I did the auto swap, that was the best place to put the shifter
 
OP
OP
JWMcCrary

JWMcCrary

Contributor
Bronco Guru
Joined
Oct 14, 2004
Messages
5,001
Had one on my 76 Explorer. It's a good theft deterent. If you don't know how it works, impossible to shift. Worked fine, but wouldn't buy another one, and definatly not for a trail rig.

Thanks, good info.
 

JRED

Sr. Member
Joined
Aug 13, 2006
Messages
362
I got one out of a 60s mustang. The handle matches my t handle perfect.
 

J-man

Sr. Member
Joined
Feb 5, 2011
Messages
568
Loc.
Holladay, UT
I have a really nice Hurst ratchet shifter with all parts I'll sell you for cheap if your interested. Also have a tuffy locking center console I've modified to work very well with a floor shifter setup
 

Attachments

  • IMG_2825.jpg
    IMG_2825.jpg
    81.4 KB · Views: 188
  • IMG_2823.jpg
    IMG_2823.jpg
    59.3 KB · Views: 164

NYLES

Bronco Guru
Joined
Aug 13, 2004
Messages
9,846
Jw stock C4 or beefed? either way if i was going with a ratchet shifter on a 100% trail rig it would be mounted on the cage right of the steering wheel, id never reach down .....do it dirt drag style.

I almost put that lockar in mine before the flaming river steering
 

jlylec

Sr. Member
Joined
Jul 5, 2012
Messages
891
how hard are these to install? look pretty simple. just wondering if there's something tricky i'm overlooking. i'm thinking of converting to a tilt column for manual and moving shifter to the floor. the lokar looks real nice since you can put it anywhere on the floor and avoid a tuffy console.
 

70 Steed

Full Member
Joined
Sep 13, 2011
Messages
268
how hard are these to install? look pretty simple. just wondering if there's something tricky i'm overlooking. i'm thinking of converting to a tilt column for manual and moving shifter to the floor. the lokar looks real nice since you can put it anywhere on the floor and avoid a tuffy console.

They are not that easy. See my post here:

http://classicbroncos.com/forums/showthread.php?t=206111
 
Top