C4 part identification

[johnnybgood74]

pulled the pan off on my c4 to change the filter and gasket and noticed that the tube that enters the sump of the pan looks like it has been cut on the end by a P.O. or tranny guy. are they all cut at odd angles?

 

[Broncitis]

That is the pickup tube and is specific for the EB's deep sump pan. That does look like it was made since the factory one has 4 smaller scallop cuts at the bottom, but it should work just the same.

 

[Viperwolf1]

It looks like a homemade tube. And it looks a little short.