• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Camber settings ?

OP
OP
JWMcCrary

JWMcCrary

Contributor
Bronco Guru
Joined
Oct 14, 2004
Messages
5,001
Thanks for all the replies. I'm sure the toe-in will need to be adjusted and didn't know what the specs were for camber. When I put the BC arms on back in 2006 I had the alignment checked and everything was fine, but there have been a lot of changes since then. WAH added, different knuckles, springs, shocks, replaced a heim on the steering. If it is camber I plan to live with it, I just want to know so a fix that might be simple isn't ignored.
 
Top