Can anyone identify what knob I need?

[Jamoaus]

So I bought this bronco and it's missing a knob for the transfer case. Everything I've tried (I've bought many replacements) but none of them seem to fit? The shaft of the shifter is thicker than most replacements. The transfer case is a Dana 20 and needs to be pushed down to shift. Any help would be appreciated trying to find a replacement knob.

Image

 

[Timmy390]

Guessing you have a T shift.
https://www.classicindustries.com/p...PiAHgewmRbZ5J7_jrNalPuc00mudXJCF5PsA7k9qUQVQc

Tim

 

[thegreatjustino]

Guessing you have a T shift.

If you click on his picture link, he does in fact have the T shift and is missing the handle you linked to.

Maybe you did click on the link. To the OP, this is in fact what you need.

 

[Oldtimer]

And when T handle is in 4 low it may interfere with with tranny shifter?

 

[Jamoaus]

Thank you all. Trying to figure out how to find another shifter as well for the np435 without bashing my knuckles on the dash when shifting. Anyone have any solution?

 

[thegreatjustino]

Thank you all. Trying to figure out how to find another shifter as well for the np435 without bashing my knuckles on the dash when shifting. Anyone have any solution?

Trail Edition Gear Banger Complete Kit

The much anticipated and updated NP-435 Trail Edition Gear Banger has arrived! The TEGB makes shifting your transmission smooth and easy. No longer will you need that long, twisted shifter sticking out of the floor banging your knuckles against the dash. We put together this kit to make your...

www.wildhorses4x4.com

 

[okie4570]

Thank you all. Trying to figure out how to find another shifter as well for the np435 without bashing my knuckles on the dash when shifting. Anyone have any solution?

Most folks just bend it.

 

[.94 OR]

I just spent some time and bent the shifter for my NP435 and it doesn't hit.
The T-shifter for my D20 does not have the pawl anymore and I just welded a 3/8" bolt on the top for a standard knob.

 

[Jamoaus]

Gonna try out the gear banger. Seems like a good solve and allows me to control the throw. Thanks everyone for their advice! Greatly appreciated