• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Can't Find Third Gear...3 Speed Manual (Column)

Chief Master Sergeant

Retired U.S. Air Force
Joined
Nov 6, 2002
Messages
5,222
I'm assuming it's just a linkage problem, but my neighbor is telling me it could be much more. Do I just need to adjust the nut in the shift rod?
 

feitctaj

FNG
Joined
May 3, 2003
Messages
4,319
Loc.
Group W Bench
In all the repair manuals there is an adjustment sequence using an allen wrench to adust this, guessing is like trying to bring down a C-17 with a shot gun;D
 

Skuzzlebutt

PhD, Dr. of Broncology
Joined
May 26, 2001
Messages
4,393
Loc.
Honeymoon Bay
I was adjusting mine when I found that the 35 y.o. rust on the nuts was stronger than the rods themselves. I was in need of a floor shifter anyways so it worked out good.
 
OP
OP
Chief Master Sergeant

Chief Master Sergeant

Retired U.S. Air Force
Joined
Nov 6, 2002
Messages
5,222
Yeah, I figured it out on my own. I had to adjust the nut on the shift rod. Hopefully this will work long term, as not finding third in heavy traffic is embarrasing. Skuzzlebutt, are you from Oak Harbor, WA? My inlaws live there. Nice place.
 
Top