• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Car cover without top.

Dickie

Jr. Member
Joined
Mar 1, 2017
Messages
60
Hi guys, I need to put a waterproof car cover on my Bronco with the top off. Any ideas? I have a family roll cage.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
Well, with the family cage tending to mimic a hard top, a standard cover would at least be supported from underneath. I’m sure it would be very loose and floppy compared to a full top, but at least it would not collapse in on itself.

I’ve never seen one specifically made for this purpose, but I’ve never actually looked for one either.
Custom would probably be best, but an expensive experiment too. Buying an inexpensive one first as a test would be my choice. Then you could either modify it or have a new one made knowing the parameters.

Any appendages such as a tire carrier or winch?
 

Jonathan_Cole

Full Member
Joined
May 11, 2020
Messages
154
Either use a piece of plywood or OSB on top of the cage or you could use a center support and vent made for a pontoon boat.

Sent from my Pixel 3 XL using Tapatalk
 

FordBronc

Contributor
Bronco's, yea I have a couple.
Joined
Dec 26, 2010
Messages
1,518
Loc.
Polk County, Missouri

Attachments

  • tc4.jpg
    tc4.jpg
    149.9 KB · Views: 152
  • tc13.jpg
    tc13.jpg
    59.2 KB · Views: 139
  • tc15.jpg
    tc15.jpg
    64.8 KB · Views: 136
  • tc21.JPG
    tc21.JPG
    39.5 KB · Views: 145

jba6555

Full Member
Joined
Oct 29, 2007
Messages
193
Thanks for that ebay link. I have been looking for something like that to keep my seat dry in the summer.
 
Top