• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Carburetor link rod?

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
My '77 came back from the restoration shop with an nonadjustable link rod and the OE rod is missing. I don't want a full linkage kit and the only carb rod the vendors sell is a so called improved version. Considering this is a restoration the OE type is what I need and I don't see how it could be improved anyway. I had 3 others from other Ford trucks all of different lengths. They all went to the shop for spares if they needed a different length. They're all missing and junk yard carbureted Ford trucks are seldom seen now. Does anyone know where I can find one of the EB carb link rods?
 

langester

MASTER OF MADNESS
Joined
Mar 2, 2013
Messages
2,681
Do you have a picture of what it looks like? I think I have a couple in my shed, not sure what year they came from though.
 

JKH67302

Full Member
Joined
Apr 25, 2009
Messages
189
I am 90% positive I have mine off of my 67. I'll check tomorrow. I am in Tucson too so if I got it it should be easy to work out getting it you ya.
James

Sent from my SM-G975U using Tapatalk
 

blubuckaroo

Grease Monkey
Joined
Jun 11, 2007
Messages
11,796
Loc.
Ridgefield WA
My '77 came back from the restoration shop with an nonadjustable link rod and the OE rod is missing. I don't want a full linkage kit and the only carb rod the vendors sell is a so called improved version. Considering this is a restoration the OE type is what I need and I don't see how it could be improved anyway. I had 3 others from other Ford trucks all of different lengths. They all went to the shop for spares if they needed a different length. They're all missing and junk yard carbureted Ford trucks are seldom seen now. Does anyone know where I can find one of the EB carb link rods?

Someone must have removed that adjustable link.
My '77 has the adjustable link rod. It's been connected to four different carbs in its life.
This looks like a replacement. Check it out.
https://www.jegs.com/i/JEGS/555/157...vrn5OUkTZp1OvlrGL1ni_w5sgJxQa-4IaAu23EALw_wcB
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
I think you're going to have to make a special trip down to that shop that did the work and look around the place for any extra parts they may have missed.
I know it's not the same as having just one vehicle in a small garage to keep track of parts in, but a pro shop really should have parts-organization down to a science and art form. Or they're going to continue having trouble returning customer's vehicles fully intact.
Seems like this is the second thing gone missing from your build? Maybe that's not too bad considering how long and how much work was done. But it sure is frustrating!

Good luck.

Paul
 

frenchy

Contributor
Bronco Guru
Joined
Nov 29, 2005
Messages
1,043
Pretty sure I have one here in indiana if others dont. I converted my 77 to a cable.
Let me know.
frenchy
 

SP73

Full Member
Joined
Jun 25, 2017
Messages
165
Call Nick at Northeast Classic Ford Parts. Even if it is not on his website, he most likely has it. I just got a few carb related parts from him....

https://northeastclassicfordparts.com/


Sorry this is way off topic, but did anybody zoom in on the Bronco up in the top left corner of their website? Gas filler caps are on the right, and it looks like the steering wheel might be too.
 

Slowleak

Bronco Guru
Joined
Sep 12, 2013
Messages
4,013
Loc.
Georgia
Sorry this is way off topic, but did anybody zoom in on the Bronco up in the top left corner of their website? Gas filler caps are on the right, and it looks like the steering wheel might be too.


That picture is just reversed. If you flip it back you get this.
42a87f22030d206806fc7d324ae91a29.jpg
 

SP73

Full Member
Joined
Jun 25, 2017
Messages
165
Ahhhh, now I see! Thought I was seeing a unicorn for a second!:eek:
 
OP
OP
J

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
JKH67302 I'll happily pick it up and make it worth your trouble. I think the '67s had the bell crank on the intake. My '68 did. That doesn't mean you don't have the '73 up direct rod from the fire wall bell crank to the carb. I think the change was needed for the C4 kick down. All the Jegs/Summit after market types look very different from the OE part. This is a restoration.
Frenchy; I love your body mount pads that ARE on the Bronco. If you could, just PM me.
The shop was great on the big things. Small things got lost all too often. Resto-mods are heavy on mods not so much on accurate restorations. The TV shops are all that way, ie Chip Foose Gas Monkey etc. EBs came up short on a few things but not many. The OE throttle linkage always worked perfectly, at least once I freed up the fire wall bell crank.
 

JKH67302

Full Member
Joined
Apr 25, 2009
Messages
189
Here is what I got. I'd have to set it on an intake to remind myself what went where. There is one adjustable rod, in the second pic, but I don't think that went to the carb itself but to the other bracket that mounted to the intake.
James
389b6dd22a8db800f7eae0591f48ca4a.jpg
ccf015ef61997b7887a33761a441521c.jpg


Sent from my SM-G975U using Tapatalk
 

JKH67302

Full Member
Joined
Apr 25, 2009
Messages
189
Those photos were kinda grainy. Here is a better photo of the adjustable rod.
James
6bea35d4c4ea1373e8aa4857aaa106e4.jpg


Sent from my SM-G975U using Tapatalk
 
OP
OP
J

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
That's what my '68 had. The one I need is just a single rod that is attached at the carb's throttle arm and at the bell crank on the firewall. The carb end snaps onto the ball stud and the other end has a 90 degree bend that runs through a hole at the bottom of the bell crank. the carb end is an internally threaded tube that the firewall end screws into, making the length adjustable.
 

JKH67302

Full Member
Joined
Apr 25, 2009
Messages
189
Bummer...sorry I could not help ya! Good luck.
James

Sent from my SM-G975U using Tapatalk
 
OP
OP
J

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
Thanks for the effort. The TBP link rod turns out to be the '73-'77 OE type. I called them to see what they mean by "improved design" and tho they couldn't tell me, I deduced that they called '73-'77 part "improved' over the '66-'72 type that had a bell crank on the intake. It's really only an improvement for auto transmission EBs. The C4s need a kick down rod that occupies the same space as the bell crank on the intake. I feared "improved" meant a Chinese piece of plastic junk.
 
OP
OP
J

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
Update; the shop some how kept one of the F150 rods that I grabbed. The length of the back portion with the 90 degree is the only difference with the EB version. I cut it to EB length and did the 90 degree. It works perfectly and looks OE, cause it is. My take away is the fact that Tucson's junk yards are worthless for classic vehicle owners.
 

bronco t

Contributor
Sr. Member
Joined
Jun 28, 2010
Messages
799
Loc.
San Diego CA
77 Throttle linkage

That's what my '68 had. The one I need is just a single rod that is attached at the carb's throttle arm and at the bell crank on the firewall. The carb end snaps onto the ball stud and the other end has a 90 degree bend that runs through a hole at the bottom of the bell crank. the carb end is an internally threaded tube that the firewall end screws into, making the length adjustable.

Here is a picture of my 1977 linkage. Hope this helps you find the "missing link"!

Happy Thanksgiving!
 

Attachments

  • 1977 Throttle Linkage 2.jpg
    1977 Throttle Linkage 2.jpg
    113 KB · Views: 62
OP
OP
J

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
True they do work with any carb. My AFB is a little weird in that the kick down rod attaches outside of the throttle rod. So the carb link rod and kick down rod cross over each other and tend to bind in their arc of movement. As seen in bronco t's photo, the kick down arm on the carb being outboard of the throttle arm is a PITA. With Ford and Holley carbs things go more together clean and sanitary.
 
Top