• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Centech Wiring Help

ryan287

Full Member
Joined
Jan 15, 2006
Messages
190
Loc.
Orange County, CA
Help is very appreciated!

I have a Centech harness and am trying to get rid of my keyed ignition. I would like to move the "power on" to a simple marine switch (red box in photo or the other one - haven't decided).

For the starter I would like to use my control panel by Arc Auto Rod : http://www.autorod.net/products/?TB_LINK=table_485bf7d08e08a

How do I exactly wire the existing ignition wires to the marine switch? I remember that something bad would happen to my power when the black wire with the eyelet would get loose - what does that wire do?

Also, I'm running a Holley HP EFI and I want to insert a magnetic reed kill switch as one of my security measures. For the Centech harness, where is there a switched 12v power that will energize when I flip the marine switch on (assuming I've tripped the reed switch)?

Thanks again for any advice,
 

Attachments

  • 20140314_170529.jpg
    20140314_170529.jpg
    51.4 KB · Views: 102
  • 20140314_170556.jpg
    20140314_170556.jpg
    75.5 KB · Views: 90
  • 20140314_170856.jpg
    20140314_170856.jpg
    111 KB · Views: 80
Last edited:

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Bringing this back to the top for you ryan. Not surprised that nobody has answered though, as your goals are pretty trick and unusual for most of us here. Talked about, but not sure how many have actually done it, finished it and are up and running. So answers could be few and far between.

The Black wire with the eyelet (should have a green stripe?) is your ACC wire and powers more than half the items in the truck. So yeah, if it gets loose a lot of strange things are likely to happen.
But whatever you do, it's NOT a ground! As is assumed a lot of times.

Otherwise, not a clue about any of the items you're using, so can't help.
Good luck.

Paul
 
OP
OP
ryan287

ryan287

Full Member
Joined
Jan 15, 2006
Messages
190
Loc.
Orange County, CA
Thx Paul, I appreciate you chiming in. I'm making progress, but it's hard to get my head around some of the routing. You're input on the black wire is helpful.
 
Top