• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Classic Consoles

SouthPaw74

Contributor
Jr. Member
Joined
May 20, 2021
Messages
104
Loc.
South Florida
Curious if anyone in the community has purchased the classic consoles "humphugger" for their early bronco? Would appreciate any feeedback, reviews or pictures. Trying to decide for my 73. Thanks in advance!
 

Sam 15

New Member
Joined
Mar 14, 2021
Messages
46
Curious if anyone in the community has purchased the classic consoles "humphugger" for their early bronco? Would appreciate any feeedback, reviews or pictures. Trying to decide for my 73. Thanks in advance!

This may not help you as the humphugger I had was in my 63 falcon convertible. The cup holders were the center console and the sq. item holder was toward the firewall. What I can tell you, is it worked great and was stable on the hump. Mine came with the car when I got it...they are pricy in my opinion but worked good in that application.

I have the tuffy center storage with cup holder that came with my bronco but its not installed as I'm doing some interior cleanup.

I had this one. https://www.cupholdersplus.com/shor...j1K3QuBoxJKLjp83ZjYePBKOL5tXVtxhoCgLsQAvD_BwE

Rick
 

chrlsful

Bronco Guru
Joined
Oct 21, 2009
Messages
1,448
don't want any. Like to use that space, but
Igloo had 1 w/the same 2 cup holders & a hinged lid for refills.
Got the antique @ fleebay (30$).
Keep it out more'n in.
Tuffy'n the above R not attractive either (to me).
Not every rig has "era correct".
8^ )
 

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,121
Loc.
Cuchara, CO
I put one in my half cab a few years ago. It was before they made a specific one for an early Bronco. I bought the one for a mustang. I cut a 2x6 (or 8?) to fill the area for the hump to make it fit better on the flat floor and raise it up a bit. It turned out nice and matched the seat upholstery very well.
 

Attachments

  • C3814AB4-54B3-4541-B1E2-99EB856AFA0C.jpg
    C3814AB4-54B3-4541-B1E2-99EB856AFA0C.jpg
    60.8 KB · Views: 180

abn373

Contributor
Sr. Member
Joined
Jan 6, 2012
Messages
420
Loc.
Charleston, SC
I put a Classic Consoles bench seat console in my wifes's 1995 F150.
I know that doesn't apply to Broncos, but I am saying the quality is very good.
Order them factory direct. I originally ordered from cupholdersplus and it was backordered for many weeks. I got ahold of them and they said they can't just order one console and have to wait for a bulk purchase. The guy even said hey, just order it from the manufacturer. I did, and had it in no time.
 

Attachments

  • 20210726_170255.jpg
    20210726_170255.jpg
    121.3 KB · Views: 154

abn373

Contributor
Sr. Member
Joined
Jan 6, 2012
Messages
420
Loc.
Charleston, SC
Yeah, it actually has a strap/buckle that goes into the crack of the seat and up around to the front. cinches down pretty solid. She needed the cupholders mostly, but the flip open lid is nice for a little bit of storage
 

Master Chief

Contributor
Bronco Guru
Joined
Nov 24, 2006
Messages
1,312
OP
OP
SouthPaw74

SouthPaw74

Contributor
Jr. Member
Joined
May 20, 2021
Messages
104
Loc.
South Florida
Thank you all for the feedback....I like the ability to remove the classic console....not looking for a permanent fixture!! On to a radio solution!!
 

chrlsful

Bronco Guru
Joined
Oct 21, 2009
Messages
1,448
"...ability to remove the classic console..." yup, almost permanently in my case.

"...radio (solution)..." oem unit/place or if not - inside the glovie 4 me (I listen to one station, usually do so on the net)..."
"music"? that's different. Can get quite loud (parked'n picnicking) and have a unit under pass seat for that
 
Top