I have the Tom's 3.1 turn box as well. They supplied me with a piece of 3/4" dia shaft with one end splined to match the factory style u-joint at the lower end of my steering column. I had to cut the other end to length and machine it to fit the end of a Flaming River u-joint which was made to fit a 3/4" "D" shaft. Unfortunately, I had to make a u-joint from two different joints so that I had one end with the 3/4" "D" and the other with a 17mm "D" that fits the input shaft on the 3.1 box. I imagine you can buy a joint with that combination but I just "happened" to have two different joints that I could make the correct combination from. Don't ask, it's a long story. %) BTW, the 3/4" shaft was not part of the Tom's kit but they do give you a Flaming River u-joint to fit the new box. What I was not satisfied with was the fact that the other end of the u-joint they supplied was designed to be welded to your stock shaft. In my case a previous owner had added a 76-77 style box and for a bunch of reasons I could not use the existing lower shaft.