• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Cloth wire insulation replacement?

clinem03

Sr. Member
Joined
Sep 9, 2017
Messages
401
What are you all using to replace the OE cloth wire insulation? My wagon still has the original wiring and it’s in great shape but I’m trying to get things cleaned up and tidy.
 

chuckyb

Contributor
Sr. Member
Joined
Oct 25, 2016
Messages
960
I like the tesa tape if you want a wire wrap with the cloth look. It's easy to work with and looks good. I do think that the Painless braid is even nicer as far as looks or if there is a chance of the area getting wet.
 

GreMac

New Member
Joined
Jun 19, 2014
Messages
24

nickgp

Bronco Guru
Joined
Jan 17, 2010
Messages
1,024
If your looking for the old school asphalt impregnated wire loom, So Cal speed shop carries it. Pretty popular with the rod crowd.
 
OP
OP
clinem03

clinem03

Sr. Member
Joined
Sep 9, 2017
Messages
401
Thanks for all the tips! I ended up ordering the painless braid…
 

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
What wires were cloth covered on your '76? My '77 only had cloth insulation on the starter motor wire and then it was only near the wire clamps securing the wire. The rest of the wires and wire bundles had corrugated plastic looms.
 
OP
OP
clinem03

clinem03

Sr. Member
Joined
Sep 9, 2017
Messages
401
What wires were cloth covered on your '76? My '77 only had cloth insulation on the starter motor wire and then it was only near the wire clamps securing the wire. The rest of the wires and wire bundles had corrugated plastic looms.

Fuel sending unit wires on both tanks…
 
Top