Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
What are you all using to replace the OE cloth wire insulation? My wagon still has the original wiring and it’s in great shape but I’m trying to get things cleaned up and tidy.
I like the tesa tape if you want a wire wrap with the cloth look. It's easy to work with and looks good. I do think that the Painless braid is even nicer as far as looks or if there is a chance of the area getting wet.
I've been using a lot of this Insultherm Tru-Fit lately after someone on this forum mentioned it. Their AWG sizes can be confusing since that is the actual ID gauge, not that it'll fit an insulted wire of that gauge, but it'll fit a conductor of that gauge. Been covering the ends with heat shrink tubing to prevent fraying and to clean it up some.
What wires were cloth covered on your '76? My '77 only had cloth insulation on the starter motor wire and then it was only near the wire clamps securing the wire. The rest of the wires and wire bundles had corrugated plastic looms.
What wires were cloth covered on your '76? My '77 only had cloth insulation on the starter motor wire and then it was only near the wire clamps securing the wire. The rest of the wires and wire bundles had corrugated plastic looms.