Clutch Push Rod Replacement

[pipeline010]

So I ordered a new clutch push rod. This is the one that connects from the back of the clutch pedal down through the floor.

https://www.tomsbroncoparts.com/pro...d-wbushings-clips-66-77-early-ford-bronco-new

My mechanic was supposed to come and help me with the swap (and a few other odds/ends) but he had to back out. I figure I can handle this on my own.

Before I start, my assumption is I'm removing two cotter pins, pulling the old rod out through the boot in the floor and putting the new one on with new pins.

I'll need to depress the clutch spring down to re-attach the bottom of the new rod with the cotter pin.

And that's it right? This is just a not complex 20 minute (or so) process?

Anything I should expect?

Full disclosure: I can be a real moron.

Thanks.

 

[Speedrdr]

It’s been a while since I fooled with an EB clutch (as in over 30 years) but what you described is what I remember. As an aside, why are you having to replace that part/rod?
Randy

 

[m_m70]

Is your clutch currently adjusted properly??

If so, you'll probably want to adjust the new rod to be the same length as the one you're replacing.

or, take a look at this thread as it explains the adjustment process:

https://classicbroncos.com/forums/showthread.php?t=263136

going through this myself but I have other issues (clutch fork) as well.......%)

 

[pipeline010]

Thanks guys ya I crawled underneath when i got home. It looks pretty plug and play.

I've had to replace the rod as someone at some point shucked the bushing behind the pedal and it was just held by a cotter pin. The rubbing had done some work and the current rod has been eaten away where the pin is. I'd say I've got about 300-400 more presses before the pin snaps through the side of the rod.

It is adjusted nicely. Once I get the prior rod out ill be sure to measure the new rod to be the same length. Toms appears to simply screw (at either end) to hit the length you want.

Thanks for replies. I'll let you all know if there are any issues, but this seems to be a nothing replacement. Ezpz.