• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Clutch size issues

70sbudget

Jr. Member
Joined
Jun 1, 2017
Messages
92
Throwing together parts and having issues.

95 302 5.0 roller cam motor, 50 oz 164 tooth flywheel. Now my clutch doesn't fit the new flywheel. I've been told that the 11 inch clutch won't fit the 70 bell housing?

What size clutch do I need? The tech at summit said my new flywheel would match my new clutch. Definitely not the case
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
Is it that you're running a new flywheel and an old clutch? Might not be the size, so much as the bolt pattern.
The original clutches were the three finger "long" style, while most modern replacements are diaphragm style. Still 11" in diameter, but with different hole patterns and also different size bolts. Originals were 5/16" and the new ones are 3/8" bolts.

Could that be your issue? As far as I know all Bronco clutches were of the 11" variety for V8's, and most I6's as well. I have heard there were some smaller clutches used on some six-cylinder applications (maybe very early models?), but most I've ever seen or heard of were 11's.

Is this a '70 Bronco? Did it come with a V8 originally and that's the bell housing you're using?
Assuming you can know that of course. If you're not the original owners there are likely to be a lot of things changed that you will only find out when it's the least convenient!

Paul
 
OP
OP
7

70sbudget

Jr. Member
Joined
Jun 1, 2017
Messages
92
definitly alot has been changed. it did have a v8 302 when i got it.

i changed out the flywheel to a new incorrect 157 tooth and ordered a new matching clutch. both mated together. i ordered a 164 tooth flywheel and now the clutch which previously bolted to the 157 doesnt match the bolt pattern of the 164 flywheel.

i will try and find part numbers later today.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
If you bolted it successfully to a 157t flywheel, it's a small clutch as far as I know. So you're now trying to bolt a 10" clutch to an 11" bolt pattern. At least that's what it sounds like.
I thought that some were able to interchange, but that most were exclusive to their correct flywheel size.

Paul
 
Top