• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Coyote motor

Adam7118

New Member
Joined
May 12, 2023
Messages
40
Hey guys, I got my hands on a coyote motor with an automatic transmission out of an F150. Four-wheel-drive set up. Ideally, I’d like a manual transmission so I was wondering what your thoughts on what I need to make it work. I assume somewhere on the site there’s a good write up on what I need to fit it in the bronco. If someone could point me in the right direction, I’d appreciate it. I’m guessing people say stick with the automatic transmission
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
The coyote is a big engine. It doesn't just bolt in. Everyone who does one does it a little different than the next person. No two are installed the same unless it was done by the same person.

This is in the lines of if you have to ask such a general question, it isn't going to be a good experience in the end.

As for putting a manual transmission in place of the automatic. Yes, but what manual are you after? The ZF is a great trail rig transmission and the Mazda is a great choice for a street rig. Or you could go nostalgic and even put the stock 3-speed in there. Or an NP435, top loader...
 
OP
OP
Adam7118

Adam7118

New Member
Joined
May 12, 2023
Messages
40
The coyote is a big engine. It doesn't just bolt in. Everyone who does one does it a little different than the next person. No two are installed the same unless it was done by the same person.

This is in the lines of if you have to ask such a general question, it isn't going to be a good experience in the end.

As for putting a manual transmission in place of the automatic. Yes, but what manual are you after? The ZF is a great trail rig transmission and the Mazda is a great choice for a street rig. Or you could go nostalgic and even put the stock 3-speed in there. Or an NP435, top loader...
This is really good info. Is there a good write up somewhere on the process to fit the coyote?
 
Top