• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Currie Enterprises

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,996
How about offering a fully built crate axle? That's one of the reasons I bought from Currie. Finding a competent mechanic to set everything up isn't always easy.

Being able to bolt it in, fill it with oil, and drive it is appealing to a lot of people.

bolt in is always a plus, for sure
 

fordguy

Contributor
Bronco Guru
Joined
Jan 23, 2005
Messages
6,361
So this is for the Explorer rear disc option? I'll add that to the list of "wannas" and pass it up the chain. We've been very happy with the billet ends in the standard big bearing pattern with 1/2" bolt sizing, but if it's an option to get the ends in another flavor, it would be nice to be able to offer it.

Paul

This is why I did not consider the WH option, explorer brakes being bolt on is the best rear disc setup for mild rigs like mine because you can get the setup at pull a parts cheap.
 

EricLar80

Bronco Guru
Joined
Jun 14, 2001
Messages
2,170
This is why I did not consider the WH option, explorer brakes being bolt on is the best rear disc setup for mild rigs like mine because you can get the setup at pull a parts cheap.

This is the reason I didn't buy the super 9 option and instead opted for Quick Performance. They can build whatever you want and the price is the best out there. Currie has more options for hardcore setups for crawlers, but QP is a better option for 95% of builds I'd reckon.
 

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,996
This is why I did not consider the WH option, explorer brakes being bolt on is the best rear disc setup for mild rigs like mine because you can get the setup at pull a parts cheap.

don't blame ya.. sometimes it's about the cost savings
 

Cooter_76

Sr. Member
Joined
May 18, 2004
Messages
863
I ordered a built 3rd Member from Currie at the beginning of February. At that time, their website said it would take 3-5 days to assemble and ship. I think it was six weeks (and a whole lot of frustrated emails/phone calls) before I received it. They kept stringing me along, saying it was in production. Then they said Eaton wasn't shipping True-Trac's and didn't know when they would be in stock. I could switch to their in-house version and have it out "ASAP" which apparently meant another two weeks.

No complaints about the product, but their customer service and communication were horrible.
 

EricLar80

Bronco Guru
Joined
Jun 14, 2001
Messages
2,170
Even considering they are both 9” rear ends, the Quick Performance housing looks a lot like the super 9. Especially with the welded identification plate.
 

Attachments

  • 33D7A33F-8ADB-4455-86E6-5EDB19C75352.jpeg
    33D7A33F-8ADB-4455-86E6-5EDB19C75352.jpeg
    26.9 KB · Views: 90
  • 491D7B9A-E594-46A8-B5CA-CD06210A4AAF.jpg
    491D7B9A-E594-46A8-B5CA-CD06210A4AAF.jpg
    68.5 KB · Views: 95

markw

Contributor
Bronco Guru
Joined
Sep 10, 2009
Messages
2,066
The Currie crate is a work of art too. Made a rolling out door work bench out mine.
To reiterate if not a race rig I see no reason fo rear discs. Hydroboost and grit disc is all you need.


Sent from my iPhone using Tapatalk Pro
 

pbwcr

Sr. Member
Joined
Jul 11, 2007
Messages
652
My story
Currie is like all the companies that sell housings. They do not stock the product they build to order. Some vendors get priority and get ahead of other orders. The solution is shop the vendors for fast shipping. In my case I destroyed my D44 Jeep rear and the time to get a new housing was ridiculous. However G2 had one in stock. They are now a part of the conglomerate including 4wheel parts. Turned out is is a pretty good housing with late model internals and it fit which was a good thing.
 

SteveL

Huge chevy guy
Joined
Jun 24, 2001
Messages
11,969
Loc.
Hawthorne ca
Seeing some of you are down in so cal there is a vendor at the long Beach hot rod swap meet who sells 9" parts from brand new housings to complete rear ends. Also has a good amount of 3rd members in stock. Alot of the stuff looks like currie. There's usually a few there with exploder style disc set ups and currie axle shafts. Might be worth a look 8f you're trying to save on shipping
 

Dlish

Sr. Member
Joined
Dec 6, 2011
Messages
552
I just bought a setup from Quick Performance. Price was good compared to the competition.

I have a Quick 9" for a 69 Camaro project, really pleased with their product. Fabricated center with a drain welded in.

Give them a call for sure.
 

CaseyCurrie

New Member
Joined
Jul 27, 2021
Messages
1
Like most we have had a huge issue with Supply. It has been a very difficult year for that. We are promised product from Vendors and sometimes we go weeks without getting an answer of where the product is or what happen. Its been very hard to forecast real ETAs when we are promised things and not getting them when due date is here. We custom make every Bronco front and rearend. We do not put them on the shelf as most of our Bronco Customers want something custom to fit their exact build. We try and give you all the options you would ever want. All our front and rearends are built in order date. We do not favor shops over retail or the other way around. Most suppliers are starting to get back to production which is making it easier to get rearends built.
I am 3rd generation and started working here last year full time. I am working on process, customer service and quality to really make sure that every customer gets what they deserve. I love seeing all the classic broncos on the road and being restored.

Casey Currie
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Hi Casey. Welcome and thanks for joining up and chiming in!
Always appreciate industry info and details from a vendor. Especially one as highly thought of as your company.

Don't hesitate to pop back in whenever you have something of interest, or even if you have questions of us or want to check in with customers on the forum.

Glad you're rolling full time with the company too. Although it sounds like that means you have less time out in the world (we know what that's like!) and having fun.
So have fun with the manufacturing aspects now.

Glad to see you there, and have you here on classicbroncos.

Paul
 

gnpenning

Contributor
Bronco Slave
Joined
Dec 26, 2011
Messages
2,601
Loc.
I have more questions than answers.
Casey, good to have you here. Having vendors that show interest in their customers and help out on here creates long term customers. A great example is DirtDonk (Paul) from Wildhorses, he represents Wildhorses here with Jim and Mitch adding on. They are very well respected here. Like Paul said, keep checking in.

As a side note back in the 90s I bought a Detroit, 31 spline axles and gears for my 74 that I still have. Totally different business world back then. Used to see your booth and vehicles at the Moab jeep Safari back in those days which prompted me to buy from you guys, not much internet information compared to today. You never know where your sales will come from.

Thanks for the input.
 

Rustytruck

Bronco Guru
Joined
Feb 24, 2002
Messages
10,872
Back in the day I bought my replacement large u-joint front axles for my Dana 44 from Currie. they we first getting started. they have come along way since then.
 
Top