• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

custom heater/air box?

blazinchuck

Bronco Guru
Joined
Jul 14, 2005
Messages
3,319
ok, I remember seeing a build thread or mag article waaaaaaay back...on how to build a 3 way air box that went between the fresh air vent(pass side) and the heater box...i believe it was made from a metal flashing. any help finding that?? thanks,Chuck
 

shamu

Lucky as the day is long.
Joined
Jun 18, 2009
Messages
5,290
Loc.
Sachse,Tx
see if youcan pick up this old link classicbroncos.com/heatercraft.shtml
 
OP
OP
blazinchuck

blazinchuck

Bronco Guru
Joined
Jul 14, 2005
Messages
3,319
thanks, but thats just another heater...i was really hoping to find a thread or magazine article, that a guy built. it was a custom box that replace the bellow hose(goes between the heater box and fresh air kick panel)

man, ive tried searching everything in classic!!!! cant find!
 
OP
OP
blazinchuck

blazinchuck

Bronco Guru
Joined
Jul 14, 2005
Messages
3,319
ok, so im not dreaming up something that didnt happen lol...i emailed BD if they had an idea, but havent heard back from them yet. i thought it was about 5 years ago...i could be wrong tho...thanks Zombie
 

zombie66

Sr. Member
Joined
Aug 29, 2003
Messages
983
Loc.
Beaverton, oregon
Here it is in issue #16. Hope the pics come out ok. and have a Merry Christmas!
 

Attachments

  • scan0013 (Large).jpg
    scan0013 (Large).jpg
    91.2 KB · Views: 173
  • scan0014 (Large).jpg
    scan0014 (Large).jpg
    94.3 KB · Views: 139

zombie66

Sr. Member
Joined
Aug 29, 2003
Messages
983
Loc.
Beaverton, oregon
Not a problem! It was a Christmas miracle! I grabbed a stack of Bronco Drivers and was expecting it to be in the last one but found it in the second one.;D
 

zombie66

Sr. Member
Joined
Aug 29, 2003
Messages
983
Loc.
Beaverton, oregon
The only thing that's kept me from doing that myself is my lack of sheetmetal tools. I have been thinking of making a box with a vent door on the front like the fresh air inlet box on the drivers side to recirculate the air. And then find a way to block the inlet from the outside air with maybe a cable actuated block off plate of some kind. Just to simplify the box design. Anyone have any ideas?
 

mp

Bronco Guru
Joined
Dec 22, 2001
Messages
2,921
Loc.
Austin, TX
The only thing that's kept me from doing that myself is my lack of sheetmetal tools. I have been thinking of making a box with a vent door on the front like the fresh air inlet box on the drivers side to recirculate the air. And then find a way to block the inlet from the outside air with maybe a cable actuated block off plate of some kind. Just to simplify the box design. Anyone have any ideas?

My idea would be someone with some sheetmetal fab skills start knocking these out for resale.
 
Top