• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Custom radius arm pics please!

zeeman1

Bronco Guru
Joined
Apr 27, 2008
Messages
1,268
Loc.
Seattle
I need some pictures of your custom made radius arms. I'm primarily concerend with how you got the arm to attach to the axle housing. I really don't want to reuse the old C wedges and cut up the old arm, so what are my options? Pictures would be GREATLY apprecaited.

What else can I do besides extended radius arms to get my front end to move around a little more? Ideas welcome.
 
OP
OP
zeeman1

zeeman1

Bronco Guru
Joined
Apr 27, 2008
Messages
1,268
Loc.
Seattle
Come on, I know this has been done a few times, nobody has pics for me. :-<
 

Hal9000

Bronco Guru
Joined
Oct 12, 2008
Messages
1,324
Loc.
Flagstaff, AZ
Start checking out build threads. you'll find a bunch of them there....

I mentioned this in another thread, but this is an often enough repeated question, maybe we should have a devoted photo gallery for DIY mods. Have a section with photos of custom radius arms, a section with FW axles, a section for 4 links, EFI builds, (and maybe a few other highly popular areas of interest). Users could post up their pics there if they want and we could build a database that shows everything from partial builds/detail shots, to completed glamor shots for the eduction/edification of interested members.
 

phred

Contributor
Bronco Guru
Joined
Aug 25, 2006
Messages
3,608
Loc.
Earth
Just take the radius arms off. The front end will move freely then!!

Last month in Bronco Driver there was an article about using aftermarket Jeep arms instead. The reasoning sounded good. The arms allow caster adjustment and if I remember used a johnny joint.
 
OP
OP
zeeman1

zeeman1

Bronco Guru
Joined
Apr 27, 2008
Messages
1,268
Loc.
Seattle
Start checking out build threads. you'll find a bunch of them there.....

Thats what I thought, but it wasn't easy finding a pic of the back end of an arm that someone made themselves. I've got some ideas on how to make the back half mount to the old cast front piece, but was wondering what had been done already. I did search threads mostly though, so I'll check out some galleries and builds tonight, hopefuly that will help.

If you used a Heim up front to connect to the axle wouldn't you need some sort of control arm up top to keep the front end from wrapping all over the place?

Thanks Gents.
 

86caprirs

Sr. Member
Joined
Sep 20, 2008
Messages
400
Loc.
Chestermere, Alberta
Start checking out build threads. you'll find a bunch of them there....

I mentioned this in another thread, but this is an often enough repeated question, maybe we should have a devoted photo gallery for DIY mods. Have a section with photos of custom radius arms, a section with FW axles, a section for 4 links, EFI builds, (and maybe a few other highly popular areas of interest). Users could post up their pics there if they want and we could build a database that shows everything from partial builds/detail shots, to completed glamor shots for the eduction/edification of interested members.



THANK YOU. I wanted to see this for a while. How do we push for it now?
 

KyleQ

Bronco Guru
Joined
Apr 24, 2008
Messages
5,480
You would have to have a medical brain disability to pay that much for that setup....

For my Dad's 78' - as a temp fix - we extended the arms about 4" with DOM after moving the front axle out 4" and the welded in tube adapters and screwed in hiem joints - then just make a custom x-member and wheel it.

For my Bronco - I bought Cage arms, that is all I intend on doing - they are awesome!
 

68ford

Bronco Guru
Joined
Dec 26, 2004
Messages
2,710
You would have to have a medical brain disability to pay that much for that setup....

For my Dad's 78' - as a temp fix - we extended the arms about 4" with DOM after moving the front axle out 4" and the welded in tube adapters and screwed in hiem joints - then just make a custom x-member and wheel it.

For my Bronco - I bought Cage arms, that is all I intend on doing - they are awesome!

a lot of people must have medical issues then, how much do YOU think that whole set up should cost with labor? did you sit back and think about all the parts and their cost alone? it adds up real fast. and all the fabrication and critical measuring?
 

70_Steve

Old Guy
Joined
Dec 13, 2002
Messages
8,317
Man, I haven't seen any of Coby's stuff in a while. You find that in the "Wayback Machine"?
Joe
A friend, Motoman, still runs a wristed arm from that original design with a uniball joint. I just did a Google search...
 
Top