D20 shift rail cap removal

[Green_Bastard]

Hey guys,
I'm in the process of rebuilding my T-shift D20. I've got it completely torn down at this point with the exception of the shift rail caps. I can't seem to find any information on removing them. Is this something typically done with a rebuild and if so how do you remove/reinstall them?

Thanks in advance for any info

 

[Viperwolf1]

You don't need to remove them if they are tight and in good shape. If you need to take them out you can knock them out from the inside using a loose shift rail.

 

[Green_Bastard]

Thanks Viper. They look almost new. I'll leave them in and put a little sealer around the seem where they meet the case.


Sent from my iPhone using Tapatalk