Dana 20 / np 435 transmission mount

[Injustice]

Hoping someone can help, I have a 302 engine with a Dana 20 transfer case and a np435 four speed transmission. Does anyone know if both the transfer case and transmission both need mounts under them and where can I find it/ them.

 

[admin]

There's a single cross member mount where the transfer case and NP-435 transmission join. (the cross member bolts to the aftermarket adapter that joins the transfer case and transmission) It's the stock Bronco cross member. The NP435 doesn't require a different one.

 

[blazinchuck]

you only need the stock crossmember, if i remember the stock gets moved back a little

 

[thegreatjustino]

One mounting point for both the transmission and transfer case. The mounting point for the NP435 is in the same place as the stock transmission. Uses the same mounts as well. Available here:

http://www.wildhorses4x4.com/product/TCase_Cross_Member_Mounts

 

[Injustice]

Thanks guys appreciate the advice. Anyone know of an after market mount offered, the link from thegreatjustino is just for the bushings.

 

[admin]

I don't know if anyone makes an aftermarket version, but the stock ones shouldn't be hard to find. Post a "parts wanted" ad here on the forums. Someone probably has one laying around.

Or check the vendors that deal in used parts. I found this one on Tom's, but I'm sure most of the other vendors have them as well. They may not be listed on their web sites, so it might take a phone call to find out.

 

[LOVNBRONCOS]

heres a pic