Dana 20 rear sliding gear/ shift fork

[biggercb]

Are all the rear sliding gears the same? T shift vs J shift vs jeep vs scout?

What about shift forks?

 

[Viperwolf1]

Bronco rear slider was 33 tooth for both T and J. There were at least 3 different part numbers though. Don't know what the difference was. All rear forks should be the same.

Jeep and Scout sliders were 31 tooth. These forks are different too.

 

[biggercb]

Thanks for the info!

 

[biggercb]

Hey Viperwolf,

Is there a quick and easy way to tell a J shift from a T shift when they are sitting on the ground side by side in front of you? Is there a serial number to reference when they made the change?

 

[Viperwolf1]

Hey Viperwolf,

Is there a quick and easy way to tell a J shift from a T shift when they are sitting on the ground side by side in front of you? Is there a serial number to reference when they made the change?

Yes. The shift rail ends are different between T and J. As for the S/N, the change from T to J was somewhere between 1729758 and 1741638.