Dana 20 set screw bitch!

[Speedrdr]

I found some spares if you need them.

That’s kinda cold backdropping the set screws with a bottle of threadlocker, isn’t it?

Randy

 

[bax]

I found some spares if you need them.

I may need them. I have not gone thru the final buck o parts yet. perhaps I will get a chance to look tomorrow night after work. Thanks for the offer.

 

[stupidboy]

Doesn’t job fab sell those?
https://jb-custom-fabrication.mysho...ts/adjustable-detent-kit-for-early-bronco-d20

 

[bax]

Doesn’t job fab sell those?
https://jb-custom-fabrication.mysho...ts/adjustable-detent-kit-for-early-bronco-d20

That would be a NO. But thanks for looking.

 

[m_m70]

Doesn’t job fab sell those?

Not the part Bax is looking for.
He needs the set screw for a shift fork inside the transfer case:

What you posted are the adjustable detent springs which are accessed on the outside of the transfer case.

 

[papy]

i had the same issue when i rebuilt mine. In the end after i broke several Allen keys and stripped the heads on the screws i took it to our local machine shop and had them drill it out. even the machinist said it was b**ch to break them. If i remember correctly i think he had to re tap of of them

 

[bigjhoov]

https://www.mcmaster.com/products/~/alloy-steel-cone-point-set-screws-7/?s=cone+grub+screw

 

[bax]

Thanks for the help and information offered up on my set screw situation. I got into the last bucket of parts and found 2 in the bottom of the bucket. I'm a lucky guy. Unfortunately I have now mixed my T's and J parts into 2 buckets now. Anyway this was more of a grumpy post from me venting about how tight these things can be. I hear some people even put thread locker on them! Those guys must be racing the Baja or something!! Thanks to Phil for offering up some parts. Jerry and others for telling me where I might find replacement pieces. You are all good people. It's raining outside so looks like a good day to clean parts.