Dana 20 Shift Bar Orientation

[Bucky71]

Hey Everybody,

First time poster here - thanks to everyone for the great info on here!

I just got done rebuilding my Dana 20 T shift transfer case, and have a question about the bent bar that connects the shifter to the shift rail flat bar.

There is a 90 degree end, and a slightly tighter angle on the other end.

Can you tell me which one should be attached to the transfer case side?

Thanks!

 

[Chiclassics]

The 90° bend goes toward the transfer-case shift rail/flat linkage bar.
The slightly tighter/less-than-90° bend goes toward the T-shifter.. Post some pics as well

 

[Bucky71]

The 90° bend goes toward the transfer-case shift rail/flat linkage bar.
The slightly tighter/less-than-90° bend goes toward the T-shifter.. Post some pics as well

Got it! Thank you!

I’ve tried to post pictures, but it seems like it will only work if it’s hyperlinked - not sure how to get it to work from my phone.

 

[gnpenning]

Follow this for posting pictures. While there are other ways, this is the easiest. Even I can do it.

ADMIN - How to upload photos - Become a Contributor

There are two ways to upload photos to the forums; Free - Use an outside photo hosting site. Click here for instructions. $12 per year - Become a Contributor and help support the site. See instructions below. Become a Site Contributor! Click here to sign up. Contributor status includes...

classicbroncos.com