• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Dana 44 wheel bearing

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,983
Finally got it! Back off another 1/8 turn on the inner nut then gradually worked my torque up in 10 lb increments until .005 hub movement at 100 lbs thank God! Learning how to measure I believe was the most fustrating part but once you get the dial set up it’s a breeze and some warmer weather would have helped!

Thanks to everyone who replied to this thread and I believe this is a great write up on how to get this job done correctly!

Good deal.. :)
 
Top