• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Dash controls

73 bronco 347

Full Member
Joined
Apr 28, 2016
Messages
235
I am trying to remove all the knobs from the dash to repaint and I can not seem to get them out. Any tricks to remove the nut holding the controls to the dash?
Thank you
 
OP
OP
7

73 bronco 347

Full Member
Joined
Apr 28, 2016
Messages
235
They are regular right hand threads correct? I just ordered the bezzel nut tool. Thanks for that advice.
 

1strodeo

Contributor
Squirrel Watcher
Joined
Sep 15, 2016
Messages
3,600
Loc.
Wisconsin
yes they are right hand threads, I usually use snap ring pliers, but as mentioned take your time
 

chuckyb

Contributor
Sr. Member
Joined
Oct 25, 2016
Messages
960
You will be happy to have the bezel tool to complete this job. My 68 also had a tiny Allen set screw on a knob or two that was not obvious at first.
 

FordBronc

Contributor
Bronco's, yea I have a couple.
Joined
Dec 26, 2010
Messages
1,518
Loc.
Polk County, Missouri
Thanks for the video link chuckji, I learned a lot from that video. 73 bronco 347 Watch the video and get that tool.
 
OP
OP
7

73 bronco 347

Full Member
Joined
Apr 28, 2016
Messages
235
I did watch it this morning awesome video thank you tool is on the way. If anyone need to barrow the tool after I am done let me know.
 

chuckji

Contributor
Sr. Member
Joined
May 5, 2017
Messages
471
Loc.
SE Michigan
FordBronc - no problem. Matt (Matt's Garage) does a great job posting those videos.

As mentioned in the video, the tool works for most of the dash switches but not all.
 

JefeAZ

Bronco Guru
Joined
Aug 23, 2011
Messages
3,088
Loc.
Tucson
How about removing the knobs from the studs? Some of them need to be cut off?
 

broncodriver99

Bronco Guru
Joined
Jan 27, 2008
Messages
4,780
Loc.
Glen Allen, VA
How about removing the knobs from the studs? Some of them need to be cut off?

All of the switches have a set screw in the knob except for the headlight switch where the whole shaft comes out. The heat/defrost cables are the only ones where the knob doesn't come off(it doesn't need to) and on those the whole thing comes out from the front once you disconnect them and remove the nut on the backside of the dash.
 

JefeAZ

Bronco Guru
Joined
Aug 23, 2011
Messages
3,088
Loc.
Tucson
Ya the headlight switch and heat/defrost. Im replacing the knobs so I guess Ill try breaking the knobs off
 

1strodeo

Contributor
Squirrel Watcher
Joined
Sep 15, 2016
Messages
3,600
Loc.
Wisconsin
Ya the headlight switch and heat/defrost. Im replacing the knobs so I guess Ill try breaking the knobs off

So the spring/button release for the headlight switch knob will not release it? There's no reason to break off any knobs
 
Top