Death wobbles

[Madgyver]

Anyone know the size of the bushing on the lower tracbar to axle for 70 EB?
Upper is a heim joint. Look like a aftermarket tracbar installed by previous owners.
This is the Firebronco

 

[Local Boy]

If it's aftermarket...the bushing would be round not oblong (egg shaped). Which one you got?

I'm at work and can get you the part # later, when I get home...

Aloha

 

[Madgyver]

If it's aftermarket...the bushing would be round not oblong (egg shaped). Which one you got?

I'm at work and can get you the part # later, when I get home...


Aloha

Round.. 77 is oblong

 

[NicksTrix]

it's a 3/4 inch stud on the housing

 

[blubuckaroo]

I think a Hein joint on one end of the track bar is a great idea. The track bar can really distort the bushings. I've bought a new adjustable that I'm thinking about modifying with a Hein joint at the bottom.

 

[Dyehard]

Not to highjack this thread but, I too have just purchased an adjustable track bar and really like the thoughts of modifying it with a heim on the the frame end. Has anyone done this? What is involved?

 

[JSBX]

I have an adjustable track bar from BC Broncos on my 74 with the heim joint at the top. The bottom takes a standard bushing. It works great and have had it on for 5 or 6 years with no problems.

 

[Dyehard]

Mine came from JBG's. I'm wondering if I can just remove the threaded end (frame end) and replace it with a heim without any other modifications.

 

[Local Boy]

I'll get you the part # once I get home from work, if someone doesn't come thru before then...

Aloha

 

[Madgyver]

it's a 3/4 inch stud on the housing

Outside Diameter?

 

[Local Boy]

This one worked for my adjustable track bar... '76 BR

Bronco Graveyard part# 23030

see below.... pic failed to load here... : (

Good luck!

Happy Holidays!!!

Aloha

 

[Local Boy]

Sorry pic did not work first time around..

 

[FRANKO289]

Outside Diameter?

MERRY CHRISTMAS BUDDY !!

now that you are married again ... no more fishing pole x-mas tree ?

Franko