• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Disk brake conversion kits?

jaltemose

New Member
Joined
Jul 24, 2005
Messages
24
I'm a schmuck. I've been procrastinating upgrading my drums to disks, and yesterday I rear-ended someone after standing on the brake couldn't slow me down in time.

I see various front drum to disk conversion kits in James Duff, Jeff's Graveyard, Tom's Parts, and Wild Horses. Any opinions on these kits and whether to select one over the other? I'm running 33's, and I already have a booster.

Thanks for any help.

- Jim in Smithtown, '71 Bronco
 

t.lay

Bronco Guru
Joined
Mar 17, 2005
Messages
1,261
Loc.
Grayslake, IL
you can save a few hundred bucks by building your own kit. there's good tech articles on this site that take you through it or do a search and you'll find a ton of info. It's easy.

the quick and dirty: chevy backing plates, calipers and spindles from a 73-75 blazer - get used backing plates, spindles from jc whitney, loaded calipers from autozone

rotors and seals and hub bearings from a 84-91 bronco with manual hubs. You'll need the hub tool - available in decent parts stores for about 30 bucks. You'll probably have to grind just a bit off you knuckes to get the calipers to fit with a little clearance - no big deal.

that's the chevy conversion. If you're a ford purist there are other ways to do this using 78-79 bronco parts. I'm for ease - besides it's more about dana parts than ford or chevy (I'm assuming you are running a d44). check out articles on hydroboost to really add some stopping power.
 

seventyfiver

New Member
Joined
Feb 6, 2006
Messages
5
Disc brakes

One of my best upgrades was going to front disc brakes. I could now stop in a straight line, of course when I pulled the drum brakes off, I found the brake shoe linning seperated from its mount. I did not have a power booster and found I still had to push real hard to stop so I put a hydroboost system in and now can stop on a dime with little effort. I used Tom's system. It went on very easy as I'm sure all others would also.
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
All the vender kits are pretty much the same some just come with different options. depending on what you need you may want to check out this site too they offer several options that can be cheaper than the complete kits.
http://www.completeoffroad.com/
I'm aqquiring the parts to do my 71 right now got the backing plate and spindle both sides only ended up costing me $70 I fiqure I should be able to do the whole swap fo about $250 maybe a little less I hope.
 

TOFIC

Bronco Wrencher and Fixer
Joined
Jan 6, 2004
Messages
3,740
Loc.
Redcliff Alberta
Rear ended someone?? Can i harp and say "I told you so!"
First thing, the kits are fine if you have money but the cheapest method is the 78-79 Ford half ton or Bronco front discs a true bolt on!! Adds to the stopping power by a large margin. Got mine from a heavy half 79 4x4 for 50 bucks from a UJerk yard in boonies
NOW
If you reeeeaaaaalllllyyy want to stop in a huge hurry, lockup the 33" tires kiss the windshield, and get 9 cents worth of change from a dime there is one answer - - - hydroboost!! I sh*t you not you will be flatly amazed the amount of power this adds. You can put this on you present braking system and still get a huge improvement. Check all the tech articles and threads on this and I believe you will be a convert.
You can do this mod for a lot less than you think I have consistantly done the complete installation for less than a C note all cost included.
Ask any of the guys that have done this, they will agree with me.
TOFIC
 

TrustyRusty

New Member
Joined
Feb 5, 2006
Messages
5
what is "hydroboost" -- is it a specific brand of power booster (like off a mercury), or just a proxy for any type of power booster, like the one i see in the james duff catalog?
 

TOFIC

Bronco Wrencher and Fixer
Joined
Jan 6, 2004
Messages
3,740
Loc.
Redcliff Alberta
TrustyRusty said:
what is "hydroboost" -- is it a specific brand of power booster (like off a mercury), or just a proxy for any type of power booster, like the one i see in the james duff catalog?
hydroboost is power brakes that use the hydralic power of your power steering pump. The boost is about 4 times that of vacuum powered boosters. Lots of articles and threads on this. Read the article on the left called hydroboost brakes if you want some more information.
TOFIC
 

Broncos n' VWs

Sr. Member
Joined
Nov 6, 2005
Messages
360
I have read lots of threads, magazine articles, and even talked to Bronco owners who have done this mod and I decided that I needed to get hydroboost. So, on a whim I went to the Pick-'N-Pull here in SLC and pulled a hydroboost out of a GMC Safari. I have no idea what I am doing right now, but I at least have a start towards hydroboost. I already did my disc brake conversion, but haven't put the master cylinder in yet because I just thought that if I don't get a hydroboost unit, I wouldn't do the conversion for a long time. So, with that being said, I will try and figure this out. I will start a separate thread because I just want to see different pictures of hydroboost installations, especially if you have a Safari/Astro setup. I am so excited for this mod! :D Anything is better than the front drums! (sorry for the hijack)
 
Top