• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Do under car heatshields help?

OP
OP
taipeichris

taipeichris

Bronco Guru
Joined
May 11, 2006
Messages
1,753
Hi Guys,
Here's an old thread but it's hot in my Bronco this summer. I think I'm finally going to make those heat shields.
Keep cool and Happy Friday.
:cool:
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,625
Loc.
PNW
3/8" spacing is what I did last year...i will post temp differences from a couple years back when I ran the Torture Test btw the Exploder and Tauras fans...I was at 148+degrees on the tranny hump and floor back then and now I'm closer to 105deg on a 98F day. Will report back after testing on another 102 F day AND on the same road for apples to apples comparison to the last test...

I used sheet alum from the rear of the front seats (mufflers are directly below the seats) to above the headers where they bolt to the heads...couldn't do the entire tunnel area but at least the sides of the tunnel.
 

fordguy

Contributor
Bronco Guru
Joined
Jan 23, 2005
Messages
6,362
i have a thread going on the advantage of ceramic coatings for exhaust and headers/exhaust manifolds. Seems like someone should come up with a new product aka heat shields.
 
Top