• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Dodge wheels

doghows72

Bronco Guru
Joined
Jan 5, 2005
Messages
2,036
I have a question for you guys. I found a set of 17" dodge steel wheels. The info I am getting from the guy is they are 17x7 and have the correct 5x5.5 lugs. My question is about the backspace and the center hole. He said the backspace is about 4-5" and the center hole is three inches in diameter. The backspace I can work with as my truck will be uncut one inch body and 2 inch lift. Plan on running a 33x10.5 tire. The center hole is my concern I know they need to be enlarged.
Do these sound like they will work?? Thanks Steve.
 

broncobsession

Bronco Guru
Joined
Aug 12, 2001
Messages
4,049
1sicbronconut did it. PM him. There are pics somewhere in the LUBER thread that Shamu started.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,112
I have heard of them working. Proper thing to do is find a machinist who has a big enough lathe to chuck up the rims to properly bore out the center hole.
Not sure about the backspacing.
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
bad part about the increased back spacing is the tires will/may rub the radius arms on turns
 
OP
OP
doghows72

doghows72

Bronco Guru
Joined
Jan 5, 2005
Messages
2,036
Thanks guys. I have a friend that can handle the center part. Needs to be opened up 1/2 inch total, so only 1/4 off each side so to speak. The backspace is 4 -4.5 inches so I might need a small spacer which is fine as this will be a mostly street LUBR.
Appreciate all the help.
 

MyOriginal66

Contributor
Bronco Guru
Joined
Aug 11, 2009
Messages
2,086
Once you open up the center bore they will fit perfect. If you run BFG KM2's in 255/85/17 (33x10x17) they shouldn't rub. Of course every bronco is different.
 
Top