Donor for a tilt column?

[jason77]

I am almost ready to get my beast back on the road and the new seats I installed are a little taller than the stock ones. This puts the steering wheel a bit more into my lap than I like. Does anyone know waht would be a good donor to replace the stock column with a tilt column. I just installed a new centech harness, and it's a 77 with p/s. Thanks for any help. Jason77

 

[CodeeB]

I think most people use late 70s Ford pickups or vans. I'm using one from a 79 Ford van. I sent you a PM.

 

[kwspony]

Mine is out of a 74 nova.

 

[Madgyver]

79 Bronco

 

[jason77]

Thanks.;D At least now I know where to look.

 

[Levisbronco]

I met a guy who used a 89 Ranger for his. He also hooked up the cruise control from the steering wheel.

 

[cbfomoco]

86 e-150, it is a little longer than stock. i shaved the starter switch and at shifter off. It is a cruse wheel but i did not have time to look for the stufff the day i got the wheel. the nly real problem i have had is in mounting. I took the fatory braket with it. did some slicing and dicing and think i have it ready to mount up. if you were to reuse your own braket from your old column it would be easyer.