• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Door hinge recommendations

Bitch'nBronco

Contributor
Loose Cannon
Joined
Dec 1, 2005
Messages
3,620
Loc.
Ringwood, NJ
My wildchild lift off hinges are about cooked. I don't really care about taking the doors off anymore and want to go with stock style hinges. Any recommendations? Was thinking about repinning a stock set but have heard they don't work all that great and I have a good chance of misaligning the holes

Sent from my SM-G981V using Tapatalk
 

Rustytruck

Bronco Guru
Joined
Feb 24, 2002
Messages
10,872
I would go with a stock ford set at least they were once drilled in the same drill jig.
 

BroncoJimbo

Contributor
Long-term owner
Joined
Jun 11, 2014
Messages
291
Loc.
North GA
I would go with a stock ford set at least they were once drilled in the same drill jig.

I am need of new hinges as well. Where does one get new stock Ford hinges?
I've heard the Duff's hinges are quality but they are pricey.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
I could be wrong but I think Rustytruck was just referring to a stock replacement set. Not necessarily OE Ford stuff.
Although that's usually considered the best route!

In the case of the hinges though, as I can attest since I still have a set of brand-new-from-Ford hinges, the modern aftermarket hinges are actually better. At least in the tight action department.
The stock original OE replacements I got from the dealer in about '79 or '80 or so (could have been later, but not sure anymore) are loose and sloppy as the ones that were on my '71. Hence my still having them in the garage still with the part decal and a label with my name on it wired to a hole.
They're super sloppy...

When I took a set of our new replacements (https://www.wildhorses4x4.com/category/s?keyword=door+hinge) out of the box a couple of years ago I was very pleasantly surprised. Not sure who makes them, but they're a very fine piece of work.

Again, not sure if that's what Rustytruck meant, but if it was there is good reason for it.

Paul
 

BroncoJimbo

Contributor
Long-term owner
Joined
Jun 11, 2014
Messages
291
Loc.
North GA
Thanks Paul. I added a set of four to my wish list. I just need to schedule the time to get er done!
 

Rustytruck

Bronco Guru
Joined
Feb 24, 2002
Messages
10,872
one thing to keep in mind the stock ford hinges are not all the same. if you ever had several sets of door hinges in you hand and look at the inside of the hinges on some of them you will see additional press marks to adjust the hinges. they pressed the hinge to adjust door gaps on problematic door openings and reluctant door gaps. moving the door left and right in the door openings.
 

Jakedog

Bronco Guru
Joined
Jan 25, 2010
Messages
1,010
My dad and I re-pinned the ones on my 75 back in the 90's and they came out great.
I would try the re-pin.
 

Rustytruck

Bronco Guru
Joined
Feb 24, 2002
Messages
10,872
I have always repined the old ones but you have to be careful when re-drilling them as they are made line a precision piece going in. always mark them from the location you took them from and put them in the same place.
 
Top