• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Driver door alignment

Big Charlie

Newbie
Joined
Aug 20, 2020
Messages
11
When for a nice fall ride yesterday, stopped a couple watering holes, then got home & drivers door is a mile out of alignment. Just ruining a great ride. So it got to be body spacers, right? Closed good at last stop, then get home & not. Drivers door bottom rear is way low, so do I start at body bolt behind drivers seat? I have not had this issue before, replaced the doors 2 years ago & the fix well. Need some help on this one, please.
thanks
 

Bitch'nBronco

Contributor
Loose Cannon
Joined
Dec 1, 2005
Messages
3,371
Loc.
Havre De Grace, MD
I'd start by taking a look at the condition of your body bushings and since you mentioned you replaces the doors 2 years ago I'd check to see if all the hinge bolts and striker screws are still tight.
 

Wild horse 75

Sr. Member
Joined
May 9, 2023
Messages
358
Loc.
BC
I know this is going to sound basic but since it was fine at one stop then not, check all the hinge bolts are tight. It’s possible one of the hinges slipped and knocked it out of adjustment. After that I’d crawl underneath and make sure the 2 mounts under the middle of the drivers side are still in good shape.
 
Top