• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Dropping Aux Gas Tank

c2computer

Sr. Member
Joined
Jun 25, 2001
Messages
772
Loc.
Castle Rock, CO
Is there any "gotchas" I need to know about when I drop the aux tank? I am going to put on extended radius arms and I belive in order to weld them on I need to take out the tank. Or, I may become a Darwin Award winner. Thanks
 

Blue71

Contributor
Bronco Guru
Joined
Aug 27, 2001
Messages
5,147
The only thing I had trouble with was removing the bracket that hold the straps in front. It has bolts that mount it to the brace under the drivers floor board area. They were rusty. Spray them good and let them set. Try to loosen them a bit then tighten back up. Loosen and tighten till you have them out. It'll keep you from breaking them off.<br><br>Good luck,<br><br>Blue71
 
Top