• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Duffs power steering kit problems

Krawlin5

Jr. Member
Joined
Nov 6, 2011
Messages
161
I recently purchased a power steering kit from Duffs. The parts I recieved where all from Borgeson except for the pump which was Psc.I am assuming that they out source there brackets.I have a problem with bolts they supplied to mount pump to bracket. The bolts only have about 2 threads of engagement. The reason is because the pulley is already mounted to pump has anyone else had a issue with this? Im not trying to bad mouth Duffs but feel that this is not exceptable. I have not contacted the about as I know they are busy at Super Cel. I plan on pulling the pulley off and using the correct bolts.
 

rustbucket

Bronco Guru
Joined
Mar 22, 2004
Messages
1,579
I would try contacting them anyway. I agree 2 threads seem light. Should be at least one full thread showing, if you ask me.
 
OP
OP
Krawlin5

Krawlin5

Jr. Member
Joined
Nov 6, 2011
Messages
161
I was really wondering if anyone else had experienced this problem.
 
Top