• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

dumb steering column ??

74fiberglass

Sr. Member
Joined
Nov 27, 2005
Messages
900
Been checkin junk yards,all kind of 78-79 bronks No tilt columns unless I ain't lookin right Where is the Tilt lever at on the column? Any piks
 

EX-BRAVE

New Member
Joined
Dec 10, 2007
Messages
44
Loc.
Hooterville
If my memory is right you pushed the turn signal lever towards the dash and the column moves up or down.I had a 79 p/u and i believe thats the method.
 

bigmuddy

Contributor
Bronco Guru
Joined
Dec 28, 2004
Messages
8,063
Loc.
Marthasville Missouri
EX-brave is correct about the way they work. The easiest way to tell for me at least was to look for a little notch on the dash side of the turn signal lever. If it was there I would then climb or get into the car to check it out and make sure.

Ben
 

EX-BRAVE

New Member
Joined
Dec 10, 2007
Messages
44
Loc.
Hooterville
I once owned a 66 Ford Galaxy 500 , 2 dr. with bucket seats and the wheel did not tilt but if you pushed the gear lever past PARK the whole column would slide to the passenger side. Made getting in and out easier for large people I assume ??
 
Top