• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

efi conversion questions

nkhd1

Full Member
Joined
Jan 25, 2011
Messages
198
found a 91 mustang efi complete system for 300. includes all sensors and harness intake and dizzy. Good price?

Can i use the stock aux tank and a 23 gallon tank from broncograveyard. Neither is set up for EFI. Can they still be used? If so will they need to be modified?
Thanks
 

Rox Crusher

Bronco Guru
Joined
Dec 13, 2008
Messages
2,830
Most people abandoned the aux tank when using an aftermarket 23 gallon tank.

If it is a recent version of the BCB tank it should have a square hole in the top which will allow you to put an electric fuel pump in there.

If it is an older version it could be modified but probably better to sell it to someone who is staying with a carb but wants a larger tank. Then you could take that money and buy an EFI tank.

I don't know for certain about the fit of the mustang EFI intake and whether it will fit so I will leave that for someone else to answer.
 
OP
OP
N

nkhd1

Full Member
Joined
Jan 25, 2011
Messages
198
Thanks
If i remember it has a round hole in the top. Don't know if a pump would fit or not. It did not come from BCB but broncograveyard.
Another thing is I read this unit is 11" tall from the bottom of the intake to the highest point. May not fit without a body lift.
I am about to talk myself out of the whole thing.
 

G's Baja Bronco

Bronco Guru
Joined
Aug 7, 2010
Messages
1,362
Loc.
Sunny SO CAL
DO it, nothing better than starting it up and going, no waiting for the thing to get ready. I think that computer, harness, distributor, intake plus all sensors is a good deal for 300.

The round cover on top of your tank is probably for the sending unit. you can use the low pump, accumulator, high pump and go.
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
The intake isn't worth much more than scrap. I just gave one away. If it has good injectors, fuel rail and coolant tubes it's worth something. I wouldn't pay much for an original harness unless the connectors and wires are in really good shape. You'll still need to modify it to fit. $300 is high unless it includes the motor.
 

Pedestrian

Bronco Missionary
Joined
Sep 10, 2008
Messages
2,299
As stated the intake itself is not worth much dollar wise, but is still perfectly fine for the conversion. If you are getting the ECM, Barometric sensor, MAF, along with the usual sensors and hardware, it is a fair deal at $300. You could find it cheaper, but you have to ask yourself, how much time do you really have to invest in the hunt?
Having it all delivered to your door is worth alot. IMO
 

ransil

Bronco Guru
Joined
Sep 6, 2003
Messages
8,138
The intake isn't worth much more than scrap. I just gave one away. If it has good injectors, fuel rail and coolant tubes it's worth something. I wouldn't pay much for an original harness unless the connectors and wires are in really good shape. You'll still need to modify it to fit. $300 is high unless it includes the motor.

if it includes the ECM it's an Ok deal.
its all in one package makes it worth it instead of picking it up piece by piece.
 
OP
OP
N

nkhd1

Full Member
Joined
Jan 25, 2011
Messages
198
yep computer rails sensors all the stock stuff 100%
" was running when removed".
he says 425 and he will throw in a new high pressure pump, low pressure pump and bcb accumulator
He had it on a bronco
 
Top