Electric Fuel Tank Selector Switch

[LSUpete]

I'm installing an electric switch for the fuel tank selector on the dash. Does anyone have a diagram for the wiring connections on the back of the switch?

I know I need to connect the main AND auxillary tank sending unit wires, the wire from the selector valve and the power wire from the fuse panel....anything else?

 

[Viperwolf1]

Like this. This will power the valve when in the aux position. Route the hoses accordingly. Don't forget to ground the valve.

 

[LSUpete]

Like this. This will power the valve when in the aux position. Route the hoses accordingly. Don't forget to ground the valve.

Thanks. Does it matter how the back of switch is rotated when making the connections? The prongs don't seem have any indication on them.

 

[Viperwolf1]

Thanks. Does it matter how the back of switch is rotated when making the connections? The prongs don't seem have any indication on them.

Not really. There are 2 rows of 3 terminals. Just make the wires go in the same order. The difference would be which way the sw lever points.

 

[jsnouffer]

Here are the instructions that came with the selector valve.

 

[Steve83]