• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

engine block casting question

jon3z

New Member
Joined
Jun 2, 2008
Messages
25
Loc.
Albuquerque
I have a 77 that the PO told me had a 289 instead of the 302 it came with. I pulled the starter today and got these numbers;

OD28
C9OE-6015-C

I have been searching all morning but haven't really found what this is. Can anyone help? Thanks in advance.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
Also the block does NOT indicate the displacment. That is the crank that makes the difference in stroke between a 289 and a 302. Without getting into the engine there is no telling what you really have.

But consider that the last of the 289s were made in '68, I doubt that it is a 289. That is if the engine is stock. It could easily been built out of a bunch of parts or even been a true early 289 that got a warranty block that was cast later.

All I can say is that the previous owner was truthful when he stated that the engine has been replaced. I can't vouch for what he put in there.
 

Explorer

Bronco Guru
Joined
Mar 2, 2008
Messages
4,390
Loc.
Raphine, Virginia
There should be a date code in front of drivers side head on flat place on block to narrow down a little. Also pull valve cover and the head will be stamped 289/302 although its still guessing unless you pull the head and measure stroke.
 
OP
OP
jon3z

jon3z

New Member
Joined
Jun 2, 2008
Messages
25
Loc.
Albuquerque
Thanks, I figured that it wouldn't be that easy. I did find another similar number on the intake, it is C60E-8424-A. I couldn't find the one on the drivers side near the head.
 

wildbill

Old Bronco Guy
Joined
Jun 29, 2001
Messages
6,890
:p :p :p If you ever need to drop the pan look at the front of the crank it will be marked with a M1 wich is a 289 or a M2 and that is a 302. Good luck and have fun.:D :D :D Bill %) :cool: ;D
 
Top