Explorer Cruise control

[Datch]

Has anyone who has done the Explorer 5.0 and 4L70W swap used the explorer cruise control module. I have looked at the wiring diagram and really want to try this but was wondering if it had been done yet? Only trouble spot I see is the steering wheel controls. Thoughts?

 

[Wyflyer]

I've looked into it some, figured i'd use an aftermarket turn signal switch. EFI guy and I talked about it some, he said if I could aquire a turn signal switch and/or get the resistance for each setting he could see what it would take for it to talk to the computer.
that was about a year ago.

 

[904Bronco]

This is what I used...

http://www.summitracing.com/parts/RPC-250-1223

http://www.summitracing.com/parts/RPC-250-3032

Used a Mustang VSS in the D20 for the signal... It works Great!

 

[Datch]

I would like to try that control stalk and try to get it to work with the factory stuff, I have to get ahold of EFIGuy for my PCM re-flash and will ask him then if he feels it can be done. I have a electrical schematic that gives the OHMs for each position also.