Explorer power steering fluid reservoir

[fvb100]

I couldn’t find it in the tech article. Is there a replacement reservoir I can use for my explorer serpentine setup? One that I can buy new. The one I have is not really nice looking and has dirt inside.


Sent from my iPhone using Tapatalk

 

[bronconut73]

Ebay may have NOS ones.

Folks on here were using Ford Superduty reservoirs that could bolt to your firewall next to your master cylinder.
They were finding new ones of those on ebay too.

 

[fvb100]

Have not seen any NOS on EBay. I tried cleaning up the one I have but the black staining is stubborn.


Sent from my iPhone using Tapatalk

 

[76YETI]

I had one made. It turned out very nice, think I found him on this site, but he runs an eBay store, I’ll look.

 

[fvb100]

I had one made. It turned out very nice, think I found him on this site, but he runs an eBay store, I’ll look.

That’s great looking! Let me know if you have the link to this guy.


Sent from my iPhone using Tapatalk

 

[56f100bbw]

Yep he does nice work I got one for my 76 stainless steel custom made for your bronco

 

[904Bronco]

https://www.ebay.com/itm/3-Power-St...83.l44720.c10&nordt=true&rt=nc&orig_cvip=true

Original PS reservoir from Ford is obsolete

Jaime is great to work with and can configure the Res many different ways. Duffy Mahoney and him came up with the design. He makes a nice Rad overflow Res as well, I have bought a couple of those!

 

[76YETI]

https://www.ebay.com/itm/3-Power-St...83.l44720.c10&nordt=true&rt=nc&orig_cvip=true

Original PS reservoir from Ford is obsolete

Jaime is great to work with and can configure the Res many different ways. Duffy Mahoney and him came up with the design. He makes a nice Rad overflow Res as well, I have bought a couple of those!

Thanks, 904...I couldn’t find him

 

[fvb100]

https://www.ebay.com/itm/3-Power-St...83.l44720.c10&nordt=true&rt=nc&orig_cvip=true

Original PS reservoir from Ford is obsolete

Jaime is great to work with and can configure the Res many different ways. Duffy Mahoney and him came up with the design. He makes a nice Rad overflow Res as well, I have bought a couple of those!

Thanks for the link! I will send him a message if he can sell me one.


Sent from my iPhone using Tapatalk

 

[904Bronco]

I am in the market as well and I sent him a message through Ebay this morning... Hoping he is not shut down due to the Covid19 :-X

 

[duffymahoney]

I designed it. Jaimie makes them

jac_specialties@yahoo.com

 

[fvb100]

Thanks Duffy, I was just checking out you build. Love it. Mine will be uncut as well.

I designed it. Jaimie makes them

jac_specialties@yahoo.com

 

[ngsd]

Those look great, Are they a direct bolt on for the serp swap with proper hood clearance?

 

[fvb100]

I had some email contact with Jamie (jac_specialties@yahoo.com). He needs details of your build and can customize to fit your needs.

Since I am still building I have to wait and see what space I have between the bracket and hood.


Sent from my iPhone using Tapatalk

 

[904Bronco]

From Duffy's build... This is what I am asking for with a 1" body lift. Standard motor mounts

It is already set back away from the hood brace, no need for offset bracket

 

[904Bronco]

From Duffy's build... This is what I am asking for with a 1" body lift. Standard motor mounts

It is already set back away from the hood brace, no need for offset bracket

Apparently Jaime has a newer design with a 4" tube instead of a 3" tube.

 

[fvb100]

From Duffy's build... This is what I am asking for with a 1" body lift. Standard motor mounts

It is already set back away from the hood brace, no need for offset bracket

The finishing looks kind of rough, maybe because it was a prototype?

 

[duffymahoney]

The finishing looks kind of rough, maybe because it was a prototype?

His welding and stainless work is food grade and amazing. I don't know what you mean by rough.

Jaimie will make it anyway you want, dual hose, single, AN fittings etc...

 

[markw]

I have one as well, beautifully done, very solid and well built with perfect welds.

 

[fvb100]

His skills look amazing. No way doubting that.


Sent from my iPhone using Tapatalk